Hello, Ive been working on my 280z for awhile now, i have it running, stopping but not driving! all because of the clutch. The clutch slave cylinder was toast so i replaced it, the master cylinder is fine, so i bled the system, and re bled it, and again... and one more time! I cant seem to find any pressure, and if i remove the bleed screw oil streams out. Perhaps someone could help me here? im lost, i dont know why its being so darn stubborn.

ZMan...

You mention oil coming out of the slave... I assume you mean brake fluid? Oil will not give you the proper pressure needed to move the slave's piston.

Might want to verify that the slave's rubber hose/line is not expanding/leaking with each attempt to press the clutch. If the hose is bad, it will absorb all of the pressure vice the slave's piston.

everything is great, just it wont work, and yes im using brake fluid =P ill keep workin on it... time is one thing i do have

its all fixed... YAY... turned out to be the clutch master cylinder... it was shot. Anyways, everything is great with it now... starting to do some body work, and i took it for its first run today! :classic:

Good deal... it's a good feeling getting the Z on the road for the first time in a while.