Search the Community
Showing results for tags 'seat belt'.
Found 1 result
I have a 74 260 z. She has had some troble with starting. I rebuilt her but the wireing is so back wards I literaly can't get it straight. It died on me on my way back from a dent. app. luckily i had a timing light in the car so i could tell the coil stoped getting power. So I ran a wire straight from the battery to the coil for about 45 miles until I found the EGR valve wire was running 6/8 volts and hooked it to the ignition coil. Having long ago removing the EGR entirely. Then a month later the starter just stops working, New starter btw, and rechecked. Tried to wire the seat belt safty togther and all I got was the relay by the fusible link next to the battery moaning like a virgin at jounior prom. I'm at the piont where i'm going to have to wing it to rewire the whole car compleatly I guess. Don't know what to do. starts up just fine when I "Bump" the starter with a screw-driver, but only with a compleat and full charge on the battery. Please any advice would help. Thank you!