Z-point

Be careful where you make jokes about. I do not know the situation in the US but a lot of Z cars in the UK where delivered in that time with a sunroof from the Datsun dealer. I think our UK members/friends can vouch for that?

i think you have to put you're light up here http://hybridz.org/Review/0002/Ferrari_GTO.htm

Yep, and it never rains in California. In silver a Z car looks always good, then you notice all the fine lines in the car

An old Japanese say: “Your neighbour’s garden is always greener” But I like the name stuff and the car!!

It was December 1997, I rang up a friend of my and asked him “will you assist me in dismantling my Z car”? In two days we had the car completely in parts. Somewhere in April ‘98 the car went in the oven and after that right through to the painter. That took a while. But it was‘t my concern because I had other this to do, we moved to another city!! I got the car back in may ’99 and in July last year (’01), her maiden trip was to the Japanese Extravaganza meeting in the UK. I’m still busy with the car. Now we are making the rosettes (?), I need big mud flaps and a jack-up thing in the middle of the car, triple carbs, a roll bar, etc., etc.

Two 2inch heavy noise makers, they lead you to a Janspeed six in two header.

Finally, I meet my hero’s Tony fall and the left and Shekhar Mehta at the right. Old time Works Datsun rally drivers, great!! That was all folks, thanks for the attention.

With more and more decals. The Sony, NGK and Dunlop are remade!! Presentation at Nissan headquaters in Holland

we are almost coming to an end, hold on!

you see what mean? it's more orange now.

pic

The colour is 905! 905 is a colour that is sometimes pure red and sometimes more orange. It depends of the brightness? of the weather (lux).

That was not the meaning of my story. The list wants to hear our stories, well you get if you like it ore not. This 240Z is mine and it will never goes away again. Its now in a state better than Nissan ever sold it.

All what’s ‘beneath’ the car is powder coated; gas tank, axels, etc.

Some thing old something new, after cleaning and blasting it went to a company where they do galvanize

i've to honest it was us$880 at the caculator! but that's nothing compare to the paintjob us $ 5300 :stupid:

its was done without tax something around $1000

after a while it came home and my work started.

pic

This is stage one The car has been into a “pyrolyse” oven! That’s an oven whit only dry heat no flames. Slowly they turn on the temperature up to 360 degrees Celsius and that is 680 Fahrenheit and even so slowly they let it come down. Otherwise you it could happen your car transformed in something you do not like. Its not a well know procedure but surly effective. Al the paint, underneath car protection **** and old rubbers are gone with the wind. This means you have to do the whole car as if it where new from the assembly line. New kit layers new paint underneath, inside and outside. And also the insides off the frame. A hell off a job and I won not recommend it anymore.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1852886251 Vehicle Description I'm an expert 240Z mechanic who is proud to offer this superb 1972 Datsun 240Z from my collection. JUST PAINTED! The new white paint looks fantastic. Her engine runs strong, and a complete tune-up was just performed. This beauty also features the rare automatic transmission, and that was just recently rebuilt. This vehicle also has the following new parts: KYB struts, front & rear tie-rod ends, balljoints, and link kits. Radiator is the 3 core variety. Tires are in excellent shape. The dashboard has a custom fit cover that hides the usual small cracks that commonly develop on these cars. Of note: The filler pipe to the fuel tank has a small hole that I did not have time to fix, so it can leak a little bit of gas when being filled too fast (at high pressure). Fill it up slower and it does not leak. An inexpensive repair if desired. This 240Z is revin' to go! Everything works so it's ready to drive home. Best of all, THERE'S NO RESERVE PRICE! Vehicle Condition This vehicle has current CA registration and a clean title. This vehicle is also smog exempt in CA. Terrific condition overall. Feel free to e-mail me with your questions.

No Derk, they called Boops!! check this http://www.datsun.org./ http://www.datsun.org/fairlady/ now you are fully updated.

Jezus, Derk, Where have you bin lately. This is an ‘ordinary’ Fairlady, one of the famous cars from Datsun made by Nissan

For what it is worth Hi, Because these callipers are too heavy to send to Holland or any place else, I hunted them down here in Holland at the local store at least I think I got them. I've you have a good look at the calliper you will find the mark S12 on it. That’s the mark where all the experts talked about in there stories. Below are the models from Toyota which have the callipers on, but I think Toyota prices are high! These are remakes; they told around 145 euro that’s about us$140. They are from Hitec. HI-LUX 2.2 4X4 YN106/110 MOT.4Y 69KW 01-89 4-RUNNER PICK-UP TYPE N13 01-90 12-93 LANDCRUISER 2.4 4CIL RJ70 MOT.22R 81KW 03-86 03-90

With great interest I read an article about the vented rotor conversion at the 240Z on http://www.geocities.com/MotorCity/Track/6997/ But… as I live in Holland and the 300ZX here where equipped with 5 log nuts, can anybody supply me the Nissanparts number of the 4 log nuts 300ZX rotor? Was it only in the US the 4 log nuts where available?