a7dz
Free Member
-
Joined
-
Last visited
Everything posted by a7dz
-
-
-
-
-
From the album: Sugar scoop
Scoop with repaired edge fit to fender. -
From the album: Sugar scoop
Fiber glass rough cut. -
From the album: Sugar scoop
Scoop with repaired edge fit to fender. -
From the album: Sugar scoop
added cloth and resin. -
From the album: Sugar scoop
Rough cut glass. -
From the album: Sugar scoop
added more plies. -
From the album: Sugar scoop
Built up edge using fiber glass mesh and resin. -
From the album: Sugar scoop
Built up edge using fiber glass mesh and resin -
I am with E check the connections. The ground for the alternator is on the fender well just below the battery take it off sand the terminal and run a tap through the threads replace the screw and washers. Do the same to the wires at the alternator. Check the wire for contiuntiunty from the ground point to the alternator. These are know to over heat and then corrode giving you the problems you are having. I just replaced the gound wire in my 70. It was melted the first foot from the alternator, and at least half of the wire strainds were broken.
-
Still was fun to watch the clip again.
-
-
-
-
-
-
-
-
-
-
-
