busted240

Ok, so this is a 73 240z with round top carbs. The car had been sitting for a while and was not ran during that time. I did a few things before trying to start her but no matter what she will not start. The car does turn over, even with ether sprayed directly into the carbs it won't run, although it does pop a little with the ether in there. I replaced the spark plugs, wires, and rotor inside the cap. Distributor and cap look good. Verified spark on every plug. Replaced lines from fuel pump since they were cracking and old, verified fuel is getting directly into the carbs. Replaced all vacuum hoses with new ones, no leaks in sight. Also rebuilt the carbs after soaking them and cleaning all that gunk off. Compression is good, reads about 165 (+/- a few) on all cylinders. Timing was not touched during this process since it did run before, but I have tried twisting the dizzy throughout its adjustment and no change, will not fire still so set it back to original point. Is there anything else I need to check? This thing is killing me that I can not get it firing no matter what I do.