My friend & I were going to try to fix a dent on his 89 Camry. I was looking to buy some body filler but I am confused as to which one to get. Anybody have any opinions on which of these would work best?

http://www.autobodytoolmart.com/c-499-body-fillers.aspx?cid=FM1

Perhaps if you could post a picture of the damage the resident experts can give you a good idea of what approach to take. There's more to consider besides what (if any) filler to use. You have to worry about primer and paint as well.

Post some pictures as Mike stated. How much body work experience do you and your friend have?

http://www.autobodytoolmart.com/pc-10285-499-9605-evercoat-rage-gold-premium-lighweight-filler-112.aspx

I used this and found it to be very good, it is yellow in the can with blue hardener so when you mix it up it goes green and is really easy to see when you have the right mix.

It's really easy to sand and drys very fast, I had no problems with it clogging my sandpaper. I also bought some finishing putty but found it was harder to sand than the gold so it is still sitting in my garage.

Make sure you beat the dent out or use a slide hammer to pull it out.