-
Posts
4,637 -
Joined
-
Last visited
-
Days Won
94
Content Type
Profiles
Knowledge Base
Zcar Wiki
Business Directory
Forums
Gallery
Calendar
Downloads
Store
Collections
Classifieds
Links Directory
Community Map
Status Replies posted by grannyknot
-
I saw your comment that you put 350Z seats in your car. I picked up a pair for my 73, and I’m hoping for some words of wisdom on how you got yours mounted.
-
You'll be very pleased, very comfortable. As I remember I had to cut off the locating pins on the bottom of the 350z seats then welded on 2 steel straps that aligned with the stock seat sliders and drilled holes to match and bolted them together. Make sure when you mark the straps for drilling that the seat can slide back as far as possible, whish I could be of more help but it was 6 yrs ago and I don't have access to the car right now to check.
There are some pics starting at #256 on this thread, https://www.classiczcars.com/forums/topic/50240-thinking-about-installing-an-bmw-m6-engine-in-my-z/?&page=11#comments
Not much in the way of detail I'm afraid.
Chris
-
-
Hi Chris,
If one way doesn't want that vent drip pan, Ill gladly take up your offer.
Cheers
Chas
-
Hi Chris,
If one way doesn't want that vent drip pan, Ill gladly take up your offer.
Cheers
Chas
-
Granny,
You have a deal.
3313 Spruce Drive,
Red Deer, AB
T4N 3N7
Whatever your shipping cost, I'm good for it.
Thanks,
RDM
-
-
-
-
-
-
-
-
-
Bill, can you measure the stub shaft on that drivers side CV shaft for me please, it should be approx. 3.6" long and exactly 29 teeth. This is the shaft that enters the D/S of the R200 diff.
The passenger side shaft should be approx. 3.9" Nissan made a few different shafts around that time so I need to be sure.
Thanks,
Chris
-