Sean Dezart

Stainless steel headers, exhausts and JDM twin-pipe mufflers.

    Recommended Posts

    3 minutes ago, wheee! said:

    LOL, I found most Dutch people could understand some German, my Dutch is is limited to pannekoeks LOL

    ...and 2 hrs is not far! Have you been to Canada? :P

    et j'aimerai avoir le systeme Street-Sport, 2 seater avec JDM... mais je ne suis pas pretre!

    Ok, Canada is HUGE, I'm only 2hrs SW of Le Mans and 3 1/2 SW of Paris.

    I have 1x Street-Sport left under reserve until this weekend. If it sells, I won't have anymore until the next batch in late May. I've already taken a pre-order on that and given the guy a decent reduction for his patience.

     

    I have the Race-Sport, Full-Race and lines/mufflers still in stock.

    Share this post


    Link to post
    Share on other sites

    No problems Sean! I will give you lots of advance notice when I'm ready to order!

    Share this post


    Link to post
    Share on other sites

    Dang Sean,  I believe I may have been more patience for longer.  You didn't offer me a substantial discount. LOL  Hey guys, Sean and Zstory have a great header/exhaust system.

    Share this post


    Link to post
    Share on other sites

    5 hours ago, racer47201 said:

    Dang Sean,  I believe I may have been more patience for longer.  You didn't offer me a substantial discount. LOL  Hey guys, Sean and Zstory have a great header/exhaust system.

    Only proposing a discount because of paying in full against a May delivery - up until December I did the same deal and with 2016 prices on pre-orders.;)

    Share this post


    Link to post
    Share on other sites

    Hi.

     A little bit of news and an update of my prices.

     Unfortunately, with the way the € is performing against foreign currencies, I’ve had to readdress prices with an inevitable but modest (2.5-ish %) increase.

    As a good gesture, anyone with the intention to buy can do so now (against an August delivery) and pay using the previous prices !

     I have some parts still in stock – the rest will be available from mid-August.

     Included now on the list are my new 280ZX parts and extra S30 rear silencer options.

     In 2018, I’m hoping to offer a choice of S30 downpipes and also an L28ET header and downpipe.

     Kind regards,

     Sean

    AUS $s.jpg

    CAD $s.jpg

    IMG_20170614_135705.jpg

    IMG_20170614_135458.jpg

    USA $s.jpg

    Edited by Sean Dezart

    Share this post


    Link to post
    Share on other sites

    Double hit for the sagging loonie! Ouch.
    Totally understand mon ami

    Share this post


    Link to post
    Share on other sites

    Hello Sean

    Is your Online-shop down?

    Facebook is not usable crap for a shop, to look for parts and prices.

    Thanks

    Marcel

    Share this post


    Link to post
    Share on other sites

    Hi Marcel.

    I realise that FB is far from perfect as a 'vitrine' and that my site is overdue - my fault, I'm awaiting the new batch with which to make updated photos (eg my old ones don't show the O2 sensors and I've new products coming) and I haven't perfected a big part of the text - I have a couple of articles on exhausts that explain everything to help people choose.

    That said, it'll never be an on-line shop - I want people to contact me before buying so as to ensure they get what they need - big isn't always best and there is no obligation to buy - happy to advise and spend a moment with another zedder.

    In the meantime, people can contact me via sites such as this, via FB messenger or simply direct via email : seanz@wanadoo.fr

    Thanks for your patience and understanding.

    Kind regards,

    Sean

    Share this post


    Link to post
    Share on other sites

    I was asking because of frp pannels.

    Your shopname is on a frp pricelist.

    The exhaustlist i know well.

    Share this post


    Link to post
    Share on other sites

    I haven't mentioned this before but.......goodies !

    There is no profit in this - it's just for fun so here is the range :

    Lanyards $4

    Iron-on embroidered patches $6 (images to follow)

    Leather laser-cut key-rings $12

    T-shirts $14

    Grill badges (printed resin on s-steel) $30

    All with postage on top (if not ordering with a header/line/muffler) but I'll get them out as cheap as poss. normally no more than $12

    Keyrings.jpg

    006.JPG

    008.JPG

    002 (3).JPG

    Zstory t-shirt283.jpg

    Share this post


    Link to post
    Share on other sites

    Cool stuff Sean! Looking forward to that stage of my build... your parts look amazing!

    Share this post


    Link to post
    Share on other sites

    Sean

    I'll take the narrow key flob, grill badge, and iron patch. Can you invoice me or tell me how much to Paypal.

    You can send with the new header.

    Don

    Share this post


    Link to post
    Share on other sites

    Hi Don......the key fob is yours for free - there is a slight delay until I have the patches - can the header wait ?

    Share this post


    Link to post
    Share on other sites

    Hi Sean, was gleaning through the threads and saw you mentioned possibly offer a choice on down pipes for the S30. Have you come up with those options(are you planning round ports?)? I am a ways out from needing an exhaust but would like to have the exhaust on hand as I near that point. Also, wanted to see what you have come up with for shipping cost to the US? I am in Wisconsin, zip 54457.

    Thank ya! Have Merry Christmas.

    Wayne

    Sent from my ASUS Transformer Pad TF700T using Classic Zcar Club mobile

    Share this post


    Link to post
    Share on other sites

    Hi Wayne.

    This year I lost my workshop base and then some granny pulled out on me and the corresponding accident less me 'under the weather'' so I've lost a year really. I'm hoping to have the prototype downpipes made and checked before and Easter so it really won't be for 12 months before I'll supply. It's not just making them, it's planning the size for the packing to keep it cost effective too.

    This is only a guess for shipping - US$180 (downpipe, line and muffler).

    Thanks for the kind wishes - you and yours too.

    Sean

    Share this post


    Link to post
    Share on other sites
    Hi Wayne.
    This year I lost my workshop base and then some granny pulled out on me and the corresponding accident less me 'under the weather'' so I've lost a year really. I'm hoping to have the prototype downpipes made and checked before and Easter so it really won't be for 12 months before I'll supply. It's not just making them, it's planning the size for the packing to keep it cost effective too.
    This is only a guess for shipping - US$180 (downpipe, line and muffler).
    Thanks for the kind wishes - you and yours too.
    Sean
    Sean, sorry to hear about the mishap. Greatly appreciate yippy getting back to me. I will just keep checking back and how to see you back up and running soon.

    Wayne

    Sent from my [device_name] using http://Classic Zcar Club mobile

    Share this post


    Link to post
    Share on other sites

    Hi guys.

    Been a while and I'm sure that you've been as busy as I have elsewhere.

    The last batch in August sold out within 2x months and the latest has just arrived meaning that my garage once again becomes a rich 'dump' of cardboard and stainless-steel !

    If anyone is interested, not all was pre-paid and reserved - prices remain the same.

    Cheers

    003.JPG

    011.JPG

    019.JPG

    002.JPG

    014.JPG

    024.JPG

    023.JPG

    026.JPG

    025.JPG

    • Like 3

    Share this post


    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Recently Browsing   0 members

      No registered users viewing this page.

    • Who's Online   0 Members, 0 Anonymous, 284 Guests (See full list)

      There are no registered users currently online