Open Discussions
Open discussions around modifications of the Z.
267 topics in this forum
-
- 0 replies
- 2.4k views
Hey guys, Many of you have heard of Dapper Lighting but don't really know what our products are about. Here is a quick informational video that explains our kits pretty well. Let me know if you have any questions. Thanks! Ben
Last reply by bens1088, -
-
- 0 replies
- 2.8k views
This is old news - possibly a repost but a search doesn't find anything. There was a very attractive 370Z rebody project in Poland trying to move forward and nothing's been updated since: http://www.autoblog.com/2013/04/23/syrena-sport-returns-as-rebodied-nissan-370z/
Last reply by NVZEE, -
- 0 replies
- 1.7k views
Hello everyone, Been a Z fan for a long time. I've owned a '73 for about the last 25 years. I'm in the process of installing an older Accel DFI unit on the car. Has anyone attempted this challenge?? One of my bigger questions is the positioning of the targets of the crank trigger relative to TDC. From everything I've read looks like it should be about 40 degrees... for a total advance of 40 degrees. Also wondering if anyone has any calibration/configuration files they can share. thanks Joe in WI GO BEARS!!!
Last reply by joem64, -
- 0 replies
- 2.2k views
Extreme re-engineering project in the works at Phillips Automotive https://www.facebook.com/pages/Phillips-Automotive-Performance-LLC/140144852696123
Last reply by NVZEE, -
- 10 replies
- 4.5k views
I can't decipher this one? B110TS???,KP61,240ZG,BMW?????(?)?240ZG?CF-L??????? Did he make a new head or is it some Toyota engine... sort of looks like an S30 block underneath but a different timing cover
Last reply by John Coffey, -
- 0 replies
- 1.8k views
I like the DIY homemade speedo adapter s30z?????????????????Staff????????So-net???
Last reply by 240260280z, -
- 13 replies
- 2.5k views
Hi all- We recently picked up a 74 260z with an L28, carbuerated, for racing in Lemons. We had to put in a new fuel pump, fix a stuck float on rear carb (round tops), new NGK plugs, and put in a battery. Here is our problem: Car runs awesome for awhile. then it develops a flat spot that it wont accelerate. IF we let the car sit and idle for a few minutes, it will run well again. Any ideas? Car is a BLAST to drive and we are really excited. We are thinking perhaps no fuel vent return line is the culprit. Any ideas would be great. Thanks!!
Last reply by jrtester, -
- 3 replies
- 1.9k views
Higuys, I"m interested in connecting with anyone who has done the GTO conversion o their S30. I'm getting the last things together and would like to discuss privately little details that others have discovered, and anything else. Cheers
Last reply by TomoHawk, -
- 10 replies
- 3.4k views
I found this on motortrend yesterday. Aside from the bar across the center of the headlamps these look like they could be a good upgrade over our standard lighting. However, they are quite pricey. Bright Eyes for your Retro Ride?Peterson 701C LED replacement lamps. - Motor Trend Blog
Last reply by Dr. 240Z, -
- 0 replies
- 1.6k views
Am I the only one that hasn't seen this before? NISMO Watch - Kind of makes me want a new GT... For What It's Worth Carl B.
Last reply by Carl Beck, -
- 29 replies
- 6.9k views
Seems that Stacey is building a GTO replica using a 280Z and they asked for a set of our frame rails. Looks like a 600-hp engine could be installed. Here's what I got today from them - Thank you for supporting GearZ TV & Stacey David’s Season VII! Check out the season finale and new Premiere of Episode 13: “Supercars, Hot Rods and Go-Karts�, Premiering Tuesday, July 16, 2013 @ 8:00pm/EST on SPEED Channel featuring Bad Dog Parts: Frame rail supports for the 280 Z car… and don’t forget to set your DVR!! The premiere will also re-air at the following times: Jul 16, 2013 @ 11:00PM/EST Jul 20, 2013 @ 9:00AM/EST Jul 21, 2013 @ 7:30AM/EST
Last reply by TomoHawk, -
- 25 replies
- 6.6k views
I have decided to go through with a swap I have been contemplating for a long time. I am documenting the swap on Northwestnissans.com, and I figured I would do the same on here! _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ So... The L28E that came with my car is in pretty poor shape, sort of. Never been machined before, which is good, but the measurements are all over the damn place. I don't have the money to do that (Please don't point out the cost of the swap, I already know... haha). Basically, I have an entire 1990 300ZX just sitting here, and I would really like to use it. I'm a professionally trained auto-tech, I can use a wire-feed fairly wel…
Last reply by pureZero,
-
Recently Browsing 0 members
- No registered users viewing this page.