Jump to content

You need to be logged in to see additionnal information and be able to contact the advertiser!

Fair price paid for 240z parts I need

   (0 reviews)

Fair price paid for 240z parts I need

   (0 reviews)

$1,000.00


  • Price $1,000.00
0 Questions
0 Reviews
238 views

Description

Hi, I am attempting to restore to a high standard, a 6/1971 240z.  Here is my wish list of parts I'd like to track down:

  • Original radiator without automatic transmission fittings - need upper and lower tanks/caps to be usable
  • plastic vents in front corners of the engine bay (no tears or holes in the vents please)
  • brake master cylinder caps which are correct for a 1971 240z.
  • hood latch top plate (no dents or damage)
  • 1 adjustable length throttle linkage rod with plastic ball joint on each end - long or short - either one
  • engine compartment "trouble" light - rough condition ok (I need a nice condition toggle switch)
  • metal engine fan blade assembly and possibly mounting hardware
  • inside rear view mirror and piece of black plastic trim around mirror base plate too (mirror can't have corrosion around edges of glass)
  • Amco - aftermarket rubber floor mats
  • original nissan power antenna or power antenna parts
  • 4 pieces - rubber trim glued to corners of tool door compartments (compartments are in the front of the rear hatch deck/floor area)
  • original 14" Bridgestone 175HR14 RADIAL RD-150 spare tire.  Prefer DOT code of (check DOT code on tire) "241" or "251", but let me know what yours is
  • original carpet padding "jute" (brown horse hair like stuff). This "jute" was originally installed under the front floor carpet mats, under the seats, under the center tunnel diamond textured vinyl trim, and under the carpet in the rear hatch deck/floor.  This stuff is fragile, and it would be nice, if you have any that is in good condition, to take some care with removal (it was glued to the tunnel) and care with packaging for shipment.  Removal with diamond patterned vinyl trim/cover still attached (glued) to the top side of the jute would be preferred.  
  • 4 original hubcaps for a 6/1971 240z
  • spare tire cover board with no stains or discoloration
  • battery cover (plastic) related parts for 1971 240z 
  • original scissor jack and related red painted jack tools, yellow wheel chocks and black vinyl tool bag.  I am looking for some in really nice condition. There are letters stamped into the base of the jack that need to start with the letter Q (1971), and then be followed by F (June) as the second letter, then followed by A through Z or AA through EE as the third letter.  As best I can tell, I need a jack with any of the following stamps: (QFS, QFT, QFU, QFV, QFW, QFX, QFY, QFZ, QFAA, QFBB, QFCC)
 
Garrett 
 
434-227-2333
Marietta, GA 30062

Specs

  • Year
    1971
  • Model
    240z



Recommended Questions

There are no questions to display.


Other adverts from parts-wanted


  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.