Sign in to follow this  
  • entry
  • comments
  • views

San Diego 5th ave Auto Showcase Oct 13 2013 Japanese class?

Sign in to follow this  
jamul scott


Is anyone planning to go to the 5th ave auto showcase in San Diego Oct 13? I spoke with an organizer Brandy and asked her if there is a Japanese class, or way to group some vintage Japanese cars. She told me that there are discounts available for any club or group if 18 cars minimum can be organized. They would reserve a part of the block just for up to 25 cars.

Admittedly, I do not have Datsun Z etc. I have a 1967 Toyota Sports 800 here in the San Diego area. I would like to see a group like yours participating. Of course, I also would be interested parking with you, since there is no way toyotas would be able to muster many, or any Toyotas. I do have a friend that would display his Toyota 200GT with me to, which would be great to see along side of your cars.

Here is the website info. If someone would organize 18 or more Japanese cars, it would be be a good thing.

Fifth Ave Auto Showcase, Gaslamp, San Diego - 5th Ave Car Show. Classics, Luxury

If not, I will sign up in the "special interest" class and hang out with kit cars and various other cars with no classification.

thanks, Scott

Sign in to follow this  


Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Blog Statistics

    • Total Blogs
    • Total Entries
  • Blog Comments

    • I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.