Jump to content

Mike's Blog

  • entries
    6
  • comments
    5
  • views
    35,301

About this blog

A blog about all kinds of things!!

Entries in this blog

Welcome to Zcar Blogs

Greetings and welcome to the Classic Zcar Club BLOG area. We have set aside this area for members who wish to host their own private Z-blog. The idea is this area will be to write articles, show build-updates, and other items related to your own projects. Think of a blog as a "journal" of your adventure. While the blog can be used to create discussions, we encourage everyone to post 2-way conversations in our Forums. Enjoy your own personal blog and please feel free to jump up onto your own

Mike

Mike

My Z History

Just wanted to share some photos of my Z over the years... This photo is just after I bought and rebuilt the engine.  I drove it around through college.  At the time, I purchased the car from a family friend who was storing the car in his garage.  Purchased for $500 with a frozen engine block, bad head gasket, and seized brakes. After a few years, and the first split with my ex, I decided to 'man-up' and start taking the car apart.  I spent the next several years sand blasting, wi

Mike

Mike

Old Journal Entry

This is an entry from my old journal before turning off that module. My Z Created this as a backup to my for sale ad, removed when I finished the project. The bad thing about having a "new" restoration like this is the old parts. It's soo hard to put an old part next to a new part. While I have all of the old stuff around, there are things that you'll want to replace with new or rebuilt. The two engines should be rebuilt. While I took out the operational L24 and set it aside, it was nearly 10 y

Mike

Mike

Links to my Restoration

Here are a few of the links to threads I've posted about my '71 240z restoration:       The car's first club cruise:    

Mike

Mike



  • Blog Statistics

    • Total Blogs
      167
    • Total Entries
      251
  • Blog Comments

    • I'm still waiting on a hoist to free up before I can start bolting the new brake parts on my Z, but I did make the drill jig today.  I started with a 12mm thick Mustang wheel spacer with a pilot.  I then made a drawing to layout the holes needed.  I transfered the drawing onto the spacer and I drilled three new 1/8" holes through the jig (spacer) so I'd have the correct 4x114.3mm holes.  One hole is shared from the original 5 lug rotor.  I then bolted the jig onto the Mustang rotor and simply dr
    • Local radiator repair shops used to be plentiful but getting harder to find.  Some of them just specialize in big truck-heavy equipment radiators.  I will be needing to do the same for my project.  I have heard good reports on gas tank RENU but there are none of those franchises in my area.  Good luck, John-Lugoff, SC
    • Decided to go with the 240sx conversion. Main reason is it’s strictly for the street and the parts were easy to source. What I didn’t realize was the 14” wheels won’t clear the caliper. Now looking for a set of 4 lug 15” rims and tires I can use during the build process. Can anyone recommend a temporary solution as far as make and model preferably a steel wheel that I can use until I’m ready to buy the wheel and tire combination at the end of the project? Thanks again for all the help out there.
    • There are several reasons to use the S197 rear brakes.  The rotors are larger diameter than the SVO rotors and they are vented.  The calipers have larger pistons to give them more power.  The big beef with the Maxima rears is that they don't offer as much stopping power as the stock drums.  The S197 rears allow the addition of an adjustable proportioning valve.  The Maxima rears cannot utilize an adjustable prop since the prop needs to be all the way open to get close to enough rear bias. 
    • Any particular reason to use S197 Mustang 5-lug brakes?  The Fox body SVO Mustangs had rear discs with 4-lug.  It's a popular swap to use SVO or T-bird Turbo Coupe rear brakes to retrofit discs to other Fox body Mustangs.  These parts are still pretty common (probably available as a kit).  Might be worth checking to see if they'll fit.
  • Upcoming Events

  • Images

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.