Jump to content

joe newsom

Members
  • Content count

    61
  • Joined

  • Last visited

Community Reputation

1 Neutral

About joe newsom

  • Rank
    Active Member

Contact

  • Map Location
    Portland

Profile

  • Gender
    Male
  • Occupation
    Self Employed

My Z Cars

  • Zcars Owned
    240z
  • About My Cars
    I bought my grandpas car and now rebuilding it after he has passed away
  1. Fan control switch

    I was hoping someone might know what is missing to keep the fan switch on the center console from turning? Sent from my iPhone using Classic Zcar Club mobile
  2. Console wiring

    71 type 2 pictures behind the stereo preferred:) Sent from my iPhone using Classic Zcar Club mobile
  3. Console wiring

    Anyone have any good pics of the wiring behind the center console? Sent from my iPhone using Classic Zcar Club mobile
  4. Hatch harness questions

    I can not remember which hole I run the wiring through for the fuel sensor. Assuming there other hole get a plug? Second question is the wires that go to the fuel sensor have 4 connections. I think I discovered this while re wrapping . I don’t recall the green and black wire that are thick going to anything. Are these wires for a electric fuel pump? Sent from my iPhone using Classic Zcar Club mobile
  5. Expansion tank help

    Sent from my iPhone using Classic Zcar Club mobile
  6. Expansion tank help

    Got it dialed in
  7. Speed Odometer Reset

    It does bring up the question though. What if I were to buy a new speedo would the mileage then be 0 on the car? Sent from my iPhone using Classic Zcar Club mobile
  8. Speed Odometer Reset

    Was curious if I am using a odometer from a donor car should I use mileage on that or should I reset if that is possible? Sent from my iPhone using Classic Zcar Club mobile
  9. Stuck Heat Lever

    Awesome info Sent from my iPhone using Classic Zcar Club mobile
  10. Not to sound like a noob, by why the extra fuses and relays ? Sent from my iPhone using Classic Zcar Club mobile
  11. Harness wiring

    No not at the time, but I will be putting them in Sent from my iPhone using Classic Zcar Club mobile
  12. Harness wiring

    Got all the burnt coating off and the wire looks in good shape. Makes me believe that it was from engine source heat. I did cut out out and replace any questionable wire. I did notice one connector that looked very hot and I believe it was a relay of something todo with retarding the ignition In the second pic I pointed out the box. Looks like most of wiring on that side just got too hot. Sent from my iPhone using Classic Zcar Club mobile
  13. Harness wiring

    Anyone have good suggestions for sheathing on the engine wire harness. I have noticed towards the end of the harness by the coil connections there are a lot of charred wires. Sent from my iPhone using Classic Zcar Club mobile
  14. Deja Vu: 1971 Restoration

    Transmission turned out great. How did you get it to look so shiny Sent from my iPhone using Classic Zcar Club mobile
  15. Dash cracks

    Question for you guys. I have two cracks about 5 inches long. In your opinion is it worth trying to fix? Do those covers look good? What are the fix options? Sent from my iPhone using Classic Zcar Club mobile
×