Stainless steel headers, exhausts and JDM twin-pipe mufflers.

[Sean Dezart]

The street-sport header.

[Sean Dezart]

A future competitor in the  Carrera Panamericana

 

[Sean Dezart]

I'm coming to the end of the current batch of exhausts and headers/collecteurs/manifolds. 
I'm in the process of planning the next batch which will have some improvements because standing still = going backwards !

After having frozen my prices since May this year with a now deflated Euro € which has lost me a % on each sale, there will be a price increase.

The next batch should be available from the end of February and so I'd ask customers to be patient BUT I shall reward that patience :
anyone ordering and paying before the end of this year will receive the new, improved parts at the current prices.

Improvements include :

Lambda plugs pre-installed for gas-flow and tuning measurements full-time or on the rolling-road
Even better, snugger fitting of the headers and exhaust
Some minor issues addressed
An S30 2+2 extension pipe so as not to forget our 2+2s

Don't forget, ordered and paid before end 2015 - delivery during March 2016.

[Sean Dezart]

The planned added lambda sensor plug begins to take form.

[Sean Dezart]

New batch prices - March 2016

Here are the new prices for the next batch available from March 2016. 

January sale :

for all orders processed before the end of February, I will apply the 2015 prices.

Improvements are :

1) lambda sensor plugs in each 'Y' collecteur.

2) an even easier exhaust fitting and higher up towards the chassis.

3) a 2+2 extension to enable ALL the S30s to improve themselves.

Any questions, either PM/email : seanz@wanadoo.fr

[Sean Dezart]

Production delay

---

Just posted this up on FB :

Just had confirmation of the delivery date for the next batch of manifolds, silencers and exhausts : July !

I feel powerless, frustrated, very annoyed, worse - I'm letting YOU all down.
I placed this order initially in December 2015 with a 50% deposit and although some of the delay is 'my fault' for insisting on several modifications and upgrades, it's slipped and slipped and if their quality was one inch less than I've already enjoyed and expect, I'd look elsewhere.

Ok, for those people for whom this date presents a big problem, please contact me via email or PM and we'll try to find a solution together.

In the meantime, I appreciate your pateince and understanding - these are not mass-produced and will last a lifetime and I will do my best to reward my loyal customers.

Sean

[Sean Dezart]

Hi all, 

 

I've been a bit lazy giving updates and kinda relied upon my FB page so I apologise to those of you who don't or won't FB !  

 

Here are the latest photos with a few captions !

 

Tooling up for the revised Street-sport manifold.

 

Preparation of the bulk items ready for treatment and assembly.

 

Ok, it's happening - progress, but still lots to do....

 

JDM silencers in processing.

 

There have been some fitting issues with the previous batch which have been addressed :

thicker V-band clamp bolts (6-8mm)
thicker fixing straps (5-8mm)
replaced Street-sport lower flange bolt-holes
chamfored edge under no.1 port (here in prototype)

 

Getting there.....but just not quick enough -  just 1 (sometimes 2x men working on them)....and stopping to take 'my' photographs !

 

 

 

Finally, delivery has been confirmed as the week beginning 18th July and I shall ensure that all pre-paid orders are sent out first that week as a priority - thankyou all for your trust and patience.

 

 

Improvements are :

1) lambda sensor plugs in each 'Y' collecteur.

2) improved flange fitting and exhaust fixations

3) improved Street-sport manfold and Y-pipe collector

4) an even easier exhaust fitting and higher up towards the chassis.

5) a 2+2 extension to enable ALL the S30s to improve themselves.

 

Any and all questions - just ask - a pleasure to hear from you.

[Patcon]

That's the quite the operation...This is on my wish list...

[racer47201]

Keep up the good work,  Sean!

[Sean Dezart]

On 24/5/2016 at 1:12 PM, racer47201 said:

Keep up the good work,  Sean!

Thanks Steve.

1st model finished for inspection and test packaging - please note the lambda sensor plug on the Y-pipe collector.

 

[Matthew Abate]

I've seen some headers with smog ports. Is that going to be an option on these?

Sent from my iPhone using Tapatalk

[Sean Dezart]

Hi Mathew.

Absolutely not.