Jump to content

IGNORED

Stainless steel headers, exhausts and JDM twin-pipe mufflers.


Sean Dezart

Recommended Posts

Sean Dézart, in and around Zs for 26 years now, current President of the French Datsun club (with nearly 1300 members - not all active of course), previous Dutch Z club member for 4 years and before that Chairman and events organiser of the UK Z club.

 

Around 4 years ago I discovered that nobody was marketing reasonably priced s-steel exhausts so I set to it. Yes, there was a make and I was in contact with Judy at Stahl but they stopped and their header was already $900 before shipping and yes, there is Kameari and Fujitsubo but, a) their exhaust range is limited I feel and B) it all costs the donation of a small child !

 

I've sold modestly into Europe since and developpped and evolved the goods until now I feel confident to sell to a larger and more distant market.

 

In the range currently are :

 

1 3/4" primary pipe Full-race header : $799

1 5/8" primary pipe Race-sport header : $661

1 5/8" primary pipe Street-sport header : $537

Full 2.5" exhaust line with standard rear muffler : $559

JDM twin-exit rear muffler : $160

 

I'm looking at less expensive methods of shipping, currently $380 (tracked and insured) for a header and exhaust (with standard rear muffler) and JDM rear muffler.

 

I'll be very happy to answer any and all questions.

 

Best regards,

 

Sean

post-2209-0-29303100-1441860870_thumb.jp

post-2209-0-49211200-1441860893_thumb.jp

post-2209-0-18516200-1441860919_thumb.jp

post-2209-0-24678800-1441860931_thumb.jp

post-2209-0-51577000-1441860947_thumb.jp

post-2209-0-77214400-1441860968_thumb.jp

post-2209-0-31165600-1441860991_thumb.jp

post-2209-0-87796300-1441861007_thumb.jp

post-2209-0-37698800-1441861027_thumb.jp

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Hello Sean

Could you figure out the price to Switzerland please? I did have an ansa and liked the 2 pipes above each other.

Now I have a 21/2 inch exhaust and your muffler would be the perfect add on. (just the muffler)

 

Thanks

 

Marcel

Hi Marcel and I apologise firstly because I'm getting no notifications of replies despite having selected 'yes' !

 

€174 shipped, insured and tracked to you - a lot more than EEC countries and in the same case as Norway - it cost less to send it to Finland !

Link to comment
Share on other sites

post-2209-0-50015100-1443117809_thumb.jp

Hi Sean, great looking pipes! I noticed that all the exhaust ports are square. Do you make a round port for the like the E31 heads?

 

Thanks,

Wayne

Hi Wayne and thanks for the question, these headers will fit round-ported heads and for seriously prepped heads, there is plenty of metal that can be machined out.

 

I did a (very) rough sketch for someone here with an N47 head. There are two square-port widths - the four outer and two inner and this 'scribble' :-) shows just how little machining is necessary to allow a free exhaust gas outflowing.....but generally it is the square-ported heads used for performance gains.

 

http://datsunzgarage.com/heads/

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.