uras1 Posted December 21, 2011 Share #1 Posted December 21, 2011 mate has a patrol with a l28 and i was wondering if i can use the gearbox out of that or do i need a box from a z Link to comment Share on other sites More sharing options...
ovenfood Posted December 23, 2011 Share #2 Posted December 23, 2011 is it a separate transfer case? if it is a stand alone box I'd GUESS yes? purely on the basis nissan don't like changing things. hell if not grab an RB20 box Link to comment Share on other sites More sharing options...
chaztg Posted December 24, 2011 Share #3 Posted December 24, 2011 what year model patrol is it....2 wheel drive or 4WD? Link to comment Share on other sites More sharing options...
Adzmax Posted July 25, 2012 Share #4 Posted July 25, 2012 Just on this, what manual boxes fit L28 engines? Do any of the RB series fit? Link to comment Share on other sites More sharing options...
uras1 Posted July 26, 2012 Author Share #5 Posted July 26, 2012 have seen rb20's rear half bolted to L series front housing. But 33/34 have heaps bigger internals. There is also a modified housingto to suit s15 boxes Link to comment Share on other sites More sharing options...
Adzmax Posted September 5, 2012 Share #6 Posted September 5, 2012 Ace, I'm not sure what gearbox I'm going to be using as of yet. Link to comment Share on other sites More sharing options...
coupe72001 Posted September 25, 2012 Share #7 Posted September 25, 2012 My C210 uses a standard L housing with the guts scooped out of it and SR20DET internals instead... which is another path to consider. Link to comment Share on other sites More sharing options...
Adzmax Posted September 27, 2012 Share #8 Posted September 27, 2012 Nice, a good option! Link to comment Share on other sites More sharing options...
Lazeum Posted September 27, 2012 Share #9 Posted September 27, 2012 that's interesting! have you had to make any modification to the casing as we should do when setting up a Silvia gearbox on L-engine? Link to comment Share on other sites More sharing options...
coupe72001 Posted September 28, 2012 Share #10 Posted September 28, 2012 I pulled the gearbox from a wrecked rally car I bought, but have found the receipt for the work from Mammi Motors in Vic Australia:Strip second hand SR20det g/boxFit all gears into original Skyline L series housingMachine housing to suitSet up internal gear selectors to suitGeneral repair $480 (+ all parts costs and GST in 2006).So that's a yes, some machining required of your L box to get the guts of the SR20 box in. But looking at the inexpensive cost of the work they didn't spend week after week on it! Link to comment Share on other sites More sharing options...
uras1 Posted September 28, 2012 Author Share #11 Posted September 28, 2012 interesting, will look into this further Link to comment Share on other sites More sharing options...
Lazeum Posted September 29, 2012 Share #12 Posted September 29, 2012 That's definitely some good news, thanks! Silvia's GB are readily available and cheap in Europe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now