Results 1 to 1 of 1
Scarab Standard Equipment
This is a discussion on Scarab Standard Equipment within the Scarab forums, part of the Zcar Mods (Modification) category; Here's a list of standard equipment, along with a photocopy of a original order from Scarab. This information is available ...
- 08-14-2008 #1
Scarab Standard Equipment Here's a list of standard equipment, along with a photocopy of a original order from Scarab. This information is available in other posts, but, I wanted to dedicate a post to this topic.
Standard Features:
Drivetrain:
Balanced, blueprinted Chevy 350 (300hp) smallblock with electronic ignition
specially designed cross-flow radiator
high-performance water pump
flex fan to cool the 22-quart-capacity system
Borg Warner Super T-10 4 speed with special Hurst competition shifter linkage
complete exhaust system with a pair of glasspack mufflers
Suspension:
Koni adjustable shocks
front and rear sway bars
Teflon compression strut bushings
high-performance rack and pinion mounts
and springs by Scarab
torque control arm, it is essentially a quarter-inch-thick piece of steel bent into a U shape, with about 3/8 of rubber laid in the bottom of the U. Scarab installed it from beneath the front differential mount, bolting front and back into holes tapping into the metal framework of the differential insulator. The torque control arm minimized the forces on the mount and on the front end of the differential itself without totally eliminating the cushioning effects of the insulator like a solid mount would.
Brakes:
Disc/Drum (power) with HP pads/shoes or optional FIA 4 piston calipers
Later cars could be had with four-wheel discs, and those with drum brakes could have optional finned cast-iron drums
Interior:
Door panels are soundproofed and covered in glove soft, hand-sewn Scottish leather
Momo leather steering wheel
Seats were re-padded and covered in Scottish leather and velour to match the door panels and console lid
Deep pile carpeting
Exterior:
Trans-Am front air dam, rear Trans-Am spoiler
Twin exterior rally mirrors
louvered hood and access panels
Scarab logo with associated emblems
high-speed driving lights
All exterior Datsun badging was removed from the Scarab factory cars: the low production volume of these vehicles was highlighted by Scarab factory-specific badging that included raised Scarab lettering to replace the Datsun front fender nameplates, and Scarab Performance black-and-gold rectangular decals in the lower left corner of the windshield and the lower right corner of the rear hatch glass
heavy gold medallions containing the Egyptian Scarab Beetle emblem
Optional Features:
Drivetrain:
350 SB (325 or 370hp naturally aspirated)
Turbo (425hp)
automatic transmission
Limited slip differentials in R-180 or R-200
Brakes:
four-wheel discs
finned cast-iron drums
Interior:
Recaro contoured, reclining bucket seats with headrests
12 coats of hand-rubbed lacquer
Exterior:
whale tail
reverse scoop hood with side fender louvers
rectangular headlights
flared fender packages
rear window shade
Wheels:
Cromodora Turbina wheels
Campagnolo or Appliance Wheels
BBS wheels
Pirelli CN36 tiresMike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A Theory - RHD HS30 Model Standard Exterior Rear View Mirror Fitment
By 240 in OZ in forum Open Zcar DiscussionReplies: 42Last Post: 12-10-2012, 06:29 PM -
'72 Scarab Z Story
By 540Z in forum ScarabReplies: 2Last Post: 10-04-2011, 12:29 AM -
How much would you pay for a 70-73 Fairlady
By ToXIc in forum Open Zcar DiscussionReplies: 47Last Post: 03-07-2008, 04:51 PM -
To buy a Scarab or not to buy a Scarab?
By yor5150 in forum Open Zcar DiscussionReplies: 11Last Post: 09-16-2007, 09:04 PM -
Scarab Research
By Mike in forum ScarabReplies: 51Last Post: 12-11-2006, 04:45 PM




LinkBack URL
About LinkBacks
BMW Whitie
Yellow Jedi


Reply With Quote



Bookmarks