Glove box

[mikerosa]

Hello ,,,The P.O. removed the glove box to replace the blower. never installed a new glovebox..I took a quick look and cant see how this fits in...Is there any special thing i need to do....it does not go in from the front and cant seem to fit from the rear...this is just that cardboard box...Any tips? THANKS

[SteveJ]

It depends upon what year Z you are talking about. Edit your signature and add your car to it. That will result in better & more timely responses.

[black gold man]

Fold or collapse it . Put it in from the front. Take off door.

[SteveJ]

If it is a plastic glove box, you still take off the front door, but I wouldn't advise folding it or collapsing it.

[black gold man]

That is how is is done plastic or paper.

"You actually have to squish it to get it "
http://www.classiczcars.com/forums/s...e-!!-Glove-Box

[mikerosa]

A 71,,looks like card board

[jfa.series1]

If it is the original glove box, you may be able to fold it and get it into position from the front. If it is a new box, it will probably be very stiff and may not fold easily (potential damage here!). If new and rigid, the install will be best from the rear. The blower motor will have to come out to provide access room. Been there, done that!

Jim

[mikerosa]

Thanks

[Koalia]

I recommend to install it from rear, you need to remove the defroster tube and blower motor. Its not the easiest way but most likely best for the glove box.