Part Number for 280ZX Turbo Head Gasket?

[Marty Rogan]

Looks like the parts CD does not cover the 280 ZX. Anyone know what the part number is for an '83 ZX turbo head gasket?

Thanks,

Marty

[sblake01]

11042-P7925 according to the Nissan Fast program which supercedes to A1042-P792F according to nissanparts.cc

[Marty Rogan]

11042-P7925 according to the Nissan Fast program which supercedes to A1042-P792F according to nissanparts.cc

Thanks Stephan!

[Marty Rogan]

Thanks Stephan!

I checked that website to look up the turbo head bolts, but it doesn't seem to list them. Anyone know the part numbers for the turbo head bolts?

Thanks,

Marty

[sblake01]

11059-P7600 (5 ea.) for the long ones and 11056-P7600 (9 ea.) for the short ones according to Nissan Fast.

[Marty Rogan]

11059-P7600 (5 ea.) for the long ones and 11056-P7600 (9 ea.) for the short ones according to Nissan Fast.

Thanks again Stephan. You are a wealth of knowledge as always!

Marty

[yetterben]

Order this one its the same and they supply the gaskets to nissan anyway. Loads cheaper. Correct fire ring thickness and passage placement. Dont waste the money going to nissan to buy this gasket.

http://www.thepartsbin.com/catalog/?...2596&x=14&y=13

[Marty Rogan]

Order this one its the same and they supply the gaskets to nissan anyway. Loads cheaper. Correct fire ring thickness and passage placement. Dont waste the money going to nissan to buy this gasket.

http://www.thepartsbin.com/catalog/?...2596&x=14&y=13

That shows a gasket for a 280ZX, but does not mention a turbo. Are the gasket different between an N/A and a turbo engine? It is also curious that they show a different part number for an '81-'82 and an '83. I thought all 81-83's were the same.

[yetterben]

there is no difference from turbo to regular gasket. Look at part number there the same. Trust me when you order one from nissan its gonna say ishino on it. have run 20 psi threw these via to4e there fine. Still blow out the side under detonation and cost half the price.

[yetterben]

Only difference was the head bolts. Gasket was always the same.

[sblake01]

there is no difference from turbo to regular gasket. Look at part number there the same.

Not according to Nissan....they show different part numbers.

[yetterben]

i happen to have a turbo nissan gasket here oem from nissan and a ishino. will take a pic for yah and mic the thickness. The oem from courtesy says ishino on package. This topic is discussed in great length on hybrid. Ishino looks the same as msa gasket too for what its worth.

Up to you though. I did lots of research before i chose mine.

[sblake01]

I'm not doubting what you say, I'm just saying that when I looked it up in the Nissan Fast program it showed different part numbers. Kind of a FWIW thing......

[Marty Rogan]

i happen to have a turbo nissan gasket here oem from nissan and a ishino. will take a pic for yah and mic the thickness. The oem from courtesy says ishino on package. This topic is discussed in great length on hybrid. Ishino looks the same as msa gasket too for what its worth.

Up to you though. I did lots of research before i chose mine.

Thanks, this is great info. I will be ordering the Ishino from them. Do you know if their manifold gasket is a quality piece too? The picture looks like it is a paper gasket. I prefer to get a manifold gasket with the steel reinforcements around the holes.

Thanks,

Marty

[Marty Rogan]

11059-P7600 (5 ea.) for the long ones and 11056-P7600 (9 ea.) for the short ones according to Nissan Fast.

How can I get into the Nissan Fast System, so I don't have to bug you anymore? I need to look up the manifold gasket part number.

Thanks,

Marty