• Technical Articles RSS Feed

    by Published on 10-09-2011 05:41 PM
    content/attachments/48598-001.jpg.html

    I am posting some photos of part details as I restore. Hopefully they can be of use in the future.I painted the light compartment ...
    by Published on 06-11-2011 04:23 AM
    content/attachments/46047-2011_0522-023.jpg.html

    I'm fairly picky about vintage calipers and how they should be treated, especially with some 40 years on the clock. I'll ...
    by Published on 02-09-2013 12:47 PM
    content/attachments/60960-hardcore-energize-bullet.jpg.html

    Hi all,
    I made a new engine bay light lens out of an empty nutrition drink tube that looks like a large translucent ...
    by Published on 04-18-2011 07:22 PM     Number of Views: 2447 

    Here is a guide to what you can expect if you plan to convert from fuel injection to early (round-top) SU carbs. My particular experience with this is ...
    by Published on 03-13-2012 10:42 AM  Number of Views: 2447 
    content/attachments/51834-reinforcement-plate-location.gif.html

    Hi all,
    I went to spray the interior metal passageways of my 240Z hatch with a Transtar Amber anti corrosion ...
    by Published on 10-09-2011 07:07 PM
    content/attachments/48578-240z-hatch-trim-001.jpg.html

    The plastic trim has a barrel-shaped retaining clip that rusts. This fastens into a speed-nut like clip on the bodyHere ...
    by Published on 07-08-2013 03:29 AM
    content/attachments/64424-dsc04302.jpg.html

    Tired of the old SLOW and Tired wipers on your 240Z? Ya, Me too. SO I did some research on the subject over at HybridZ ...
    by Published on 04-21-2012 12:41 PM     Number of Views: 5760 
    Article Preview

    There have been several new wheel choices available for our Z cars over the past year, here are a few that I have taken ...
    by Published on 10-10-2011 12:46 PM
    content/attachments/48648-clean-cable.jpg.html

    I found the best way to deal with cables is to remove:

    1. the inner cable from the sheath/casing
    2. wash it
    3. wipe it with a scotch brite pad
    4. lubricate it
    5. use penetrating oil in can and flush sheath using a straw attachment

    The results are very ...
    by Published on 03-13-2012 10:38 AM  Number of Views: 2677 
    content/attachments/51831-post-location-top-view.jpg.html

    Hi all,
    The map light in my 240Z got stuck so that when the switch was pushed in to make it turn on or off it would ...

    Page 1 of 2 1 2

Search Engine Optimization by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88