• blk180

    There is no available content written by blk180
  • Recent Gallery Activity

    by Datsnut
    ∑ ∑ ∑
    Wheels & Tires
    335 photos
    254 comments
    by er34gtt2000jp
    ∑ ∑ ∑
    71' @40Z
    108 photos
    3 comments
    by er34gtt2000jp
    ∑ ∑ ∑
    71' @40Z
    108 photos
    3 comments
  • Zcar Parts
  • Recent Activity

    rossiz

    Strange whirring noise from engine...

    Thread Starter: rossiz

    monday afternoon i was fiddling with the AFM to lean out the mixture - my wife was driving behind me and said the car smelled very rich and was "making smoke" when i would accelerate. popped plugs - a little dark, some oil on a couple of them, leaned out the AFM via the spring wheel/gear by 4...

    Last Post By: Blue 11 Minutes Ago Go to last post
    x10370zx

    Introduction, Story and Request for Help

    Thread Starter: x10370zx

    Hi Everyone, I'm Mike from Dallas, TX. I'm an avid Z fan, although admittedly most of my knowledge is biased toward the newer Z33 and Z34 models. I'm here learn about the classics, tell a brief story and hopefully get some much needed help in locating a long lost Z. Here's my story: How It...

    Last Post By: x10370zx 16 Minutes Ago Go to last post
    olderthanme

    Custom aluminum dashboard group buy for all first-gen Zs

    Thread Starter: olderthanme

    I have fabricated a few dashboards and am trying to see if anyone is interested. Here is the dashboard going into my Z. I just covered it with felt for now. The dash will come in a left and a right half. Perfect for the racer or someone looking for something different than a stock dashboard. ...

    Last Post By: SteveJ 52 Minutes Ago Go to last post
    Zed Head

    1978 280Z - Mass marketing, one way to do it

    Thread Starter: Zed Head

    This guy from Atlanta posted on the Portland Craigslist. 1978 Datsun 280z, 28,534 miles

    Last Post By: SteveJ 53 Minutes Ago Go to last post
    Jarvo2

    Looking for a set of N27 Needles

    Thread Starter: Jarvo2

    I'm looking for a set of N27 needles to replace my smogger N58's that I have in my 1972 roundtops. I have a set of SM needles from ZT, but I'm concerned that I'll be running too rich with my stock setup. Does anyone have a set they're looking to part with?

    Last Post By: Stanley 1 Hour Ago Go to last post
    Healeyalt

    Manual 5 Speed Trany ID

    Thread Starter: Healeyalt

    A couple of years ago I purchased a california 76 2+2 with a 5 speed trany. From what I've read, the 76 never came with a 5 speed so a previuos owner must have put one in from either a 240Z or a 280ZX. I'd like to know what year vehicle the trany came from, but I can't seem to find any numbers or...

    Last Post By: siteunseen 1 Hour Ago Go to last post
    oranngetang

    Last Chance To Stop Me: Going Coilovers?

    Thread Starter: oranngetang

    Long story short. My fairly rust - free Series I is getting some cash thrown at it right now. 3.0L Rebello with zTherapy 4 screw round tops @ 10:1, 15x9-0 Shakotans, 225/50R15 Kuhio ASTs, front air dam, lots of electrical and weatherstrip/interior parts and.... suspension. So my initial plan ...

    Last Post By: Diseazd 1 Hour Ago Go to last post
    Stanley

    SU Float adjustment: float hitting side of bowl?

    Thread Starter: Stanley

    I noticed that once the float is adjusted to near the factory setting, which makes the bowl about half full, any further adjustment will make it overflow. Make a very small change of the tang on the float, and there's a small change in fuel level. Make another small change there's a large change in...

    Last Post By: Stanley 2 Hours Ago Go to last post
    jalexquijano

    Where to purchase complete Door Locks set with keys (2 doors and hatch)

    Thread Starter: jalexquijano

    My 1972 240z needs urgent replacement of the 2 door locks with keys. The already bought the ignition switch which is really worn. Where can i purchase a set that includes the driver and passenger door together with the hatch lock with one key for all the locks? I have been looking on ebay but have...

    Last Post By: 78zcar_blue 2 Hours Ago Go to last post
    jmorrison146

    Nose High '72

    Thread Starter: jmorrison146

    The front of my 1972 240Z rides noticeably higher (3" or so) than the rear. New KYB struts are going on but shouldn't affect the ride height. Does anyone have experience with cutting a coil off the front springs to level things out?

    Last Post By: jfa.series1 3 Hours Ago Go to last post
  • Top 10 This Week

    bartsscooterservice

    My Datsun 240Z

    Thread Starter: bartsscooterservice

    Hello, My name is Bart, and I've been on this forum before in the past, when I had a 73 240Z. That project never made it to much rust, and I sold it for parts. It's been quiet for a while,and personally I kept thinking of owning another 240Z in the future, but good ones are expensive here in The...

    Last Post By: bartsscooterservice 3 Days Ago Go to last post
    Adzmax

    1975 C110 (KHGC110 240K) Build

    Thread Starter: Adzmax

    Hi everyone, I thought I'd share the build of my C110 coupé. A bit of a back story, I purchased a white coupé back in 2008 sight unseen (just pictures on eBay). While the car looked OK the listing wasn't completely truthful and the car was really rough and full of rust.

    Last Post By: uras1 3 Days Ago Go to last post
    240dkw

    Progress on rust repairs

    Thread Starter: 240dkw

    Well it seems to be a few threads showing updates to members projects and as I did not want to be left out here are a few photos of my car. The first one is a before and after of the TC rail area. Before I sealed it up I ran a borescope up the rails and found the rail gone behind the support...

    Last Post By: rcb280z 1 Day Ago Go to last post
    BD240Z

    Dash Repair Process/Pictures

    Thread Starter: BD240Z

    The dashboard in my car had some serious cracks along the top but I couldn't pull the trigger to send it off for rework because of the cost. I wanted to try to repair it somehow though, I had to try something! Here's a few pictures of the cracks. Because of the limit on pictures in each...

    Last Post By: 12doplumbing 16 Hours Ago Go to last post
    CG240Z

    280Z Full Restore in 5 months, hopefully.

    Thread Starter: CG240Z

    Figured I'd share this 280 build for anyone interested. I had a 240 build thread going on awhile ago, but that project has currently gone on hiatus and the cars sitting in my enclosed trailer in the back yard. It's going to require more work than I can give it right now. I found a good price...

    Last Post By: EuroDat 2 Days Ago Go to last post
    nix240z

    240z fuel and brake line insulator sets and steering rack expansion reservoir

    Thread Starter: nix240z

    Each 240z fuel and brake line insulator was reproduced in a urethane plastic on a milling machine, which made for a very high quality master insulator. Each insulator is then cast in a two part high quality silicone mold. The insulators are cast in a urethane rubber with a shore hardness of...

    Last Post By: nix240z 4 Days Ago Go to last post
    zhead240

    the winter from hell

    Thread Starter: zhead240

    for those fellow members caught in this never ending winter remember to clear the snow around the exhaust area when warming up your vehicle.

    Last Post By: mjr45 6 Days Ago Go to last post
    superlen

    HellFire Status & release date annouced

    Thread Starter: superlen

    The Zfuel thread was getting kinda long, so I thought I would start a fresh one along with the new update. The original thread is here: http://www.classiczcars.com/forums/fuel-injection-s30/49964-zfuel.html Well, today the HellFire ECU ran my Z quite nicely using 100% stock components (including...

    Last Post By: superlen 3 Days Ago Go to last post
    Zed Head

    Hot-start issue with EFI - who has it, who doesn't

    Thread Starter: Zed Head

    Many people have reported having the typical 280Z EFI hot-start problem, where after ~10-20 minutes after shut-down (hot engine), the engine starts but runs very rough for what seems like 5 minutes but is actually about 30-40 seconds. Some people with EFI though, report that they don't have the...

    Last Post By: Zed Head 14 Hours Ago Go to last post
    Reverend

    Major screw up

    Thread Starter: Reverend

    I did a trade with a dude from CA... He sent me set of triple webbers and manifold. Only downside is that THIS IS NOT MATCHING TRIPLET :mad::mad: Is it anyway possible to run with this setup or should i just resell these as matching pair + one..?? :cry: All of them are 40mm. Edit:...

    Last Post By: Reverend 6 Days Ago Go to last post


Search Engine Optimization by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87