• blk180

    There is no available content written by blk180
  • Zcar Parts
  • Recent Gallery Activity

    by 240Z240Z240Z
    ∑ ∑ ∑
    Member Galleries
    35197 photos
    15921 comments
    by 240Z240Z240Z
    ∑ ∑ ∑
    Member Galleries
    35197 photos
    15921 comments
    by 240Z240Z240Z
    ∑ ∑ ∑
    Member Galleries
    35197 photos
    15921 comments
  • Top 10 This Week

    kats

    Datsun-240z Vs Fairlady-z432

    Thread Starter: kats

    Hello, I renew my website a little bit including a Z432's pictures and films. Please enjoy the sound of S20 engine,it is a natural born racer! kats here is a link, http://www.geocities.jp/datsunz903

    Last Post By: bartsscooterservice 3 Days Ago Go to last post
    bartsscooterservice

    My Datsun 240Z

    Thread Starter: bartsscooterservice

    Hello, My name is Bart, and I've been on this forum before in the past, when I had a 73 240Z. That project never made it to much rust, and I sold it for parts. It's been quiet for a while,and personally I kept thinking of owning another 240Z in the future, but good ones are expensive here in The...

    Last Post By: bartsscooterservice 1 Day Ago Go to last post
    INST3D

    S30 in 3d

    Thread Starter: INST3D

    Hi all!!I was making a 280z in 3d,so I get stuck on these: Didn't find any references in google,so that's why I here.So tell me please,are there 2 or 3 holes?If you give me a photo that would be just perfect. Thanks,here's the progress I know that's not much but....I'll be doing it in my...

    Last Post By: Dershum 4 Days Ago Go to last post
    HaZmatt

    My Datsun 280Z "Rustoration"

    Thread Starter: HaZmatt

    Hello, I wanted to post a build thread to document the process of my restoration. I have a 1975 280Z that I purchased off a local craigslist ad. Heres the ad. Ive wanted one of these cars since I was in high school and was looking for one that was in decent shape without too much rust and...

    Last Post By: HaZmatt 5 Days Ago Go to last post
    don356

    repro window sticker

    Thread Starter: don356

    has anyone ever seen reproduction window stickers available for the old z cars? i know certain popular collector cars have been recreated but haven't seen them on the zcars.

    Last Post By: Taz0162 5 Days Ago Go to last post
    Arne

    [2014] What did you do to/with your Z today?

    Thread Starter: Arne

    Rather than let these threads go on forever as they do in some other forums, I thought I'd start new ones for separate generations for the New Year. Use these threads for short, Twitter-like posts, things that may not be worth their own thread. Since only the S30 threads got any use over the...

    Last Post By: CanTechZ 2 Days Ago Go to last post
    ksbeta

    Hls30-24140

    Thread Starter: ksbeta

    So having a numbers-matching Series-1 car is great. Lightweight, there's a limited number of them, and it's plenty quick as it is. But then you all start chiming in about suspension modifications, transmission and differential swaps, motor modifications, and all order of wild sounding things...

    Last Post By: DougN 6 Days Ago Go to last post
    superlen

    HellFire Status & release date annouced

    Thread Starter: superlen

    The Zfuel thread was getting kinda long, so I thought I would start a fresh one along with the new update. The original thread is here: http://www.classiczcars.com/forums/fuel-injection-s30/49964-zfuel.html Well, today the HellFire ECU ran my Z quite nicely using 100% stock components (including...

    Last Post By: mjr45 7 Hours Ago Go to last post
    Kurbycar32

    Just ordered my Rebello 3.0, now what

    Thread Starter: Kurbycar32

    I placed the order for a Rebello 3.0 so at some point a mostly complete motor will be brought home to swap into my running car. I have done motor swaps on other vehicles but I am not a professional mechanic, what could I be forgetting? Heres my current list in no particular order: Have...

    Last Post By: nix240z 1 Day Ago Go to last post
    grnsky

    71' Refresher project starts

    Thread Starter: grnsky

    Thought I would start a thread in lieu of finally getting my 71 running this weekend!!!! The car had been in a 5 year hiatus before I bought it, and due to other projects has sat for another 2 years while in my possession. But on this memorial day weekend I was determined to get as much done...

    Last Post By: grnsky 1 Day Ago Go to last post
  • Recent Activity

    Pomorza

    Checking rear wheel bearings

    Thread Starter: Pomorza

    Hello all I drove a tad over 250 miles today for the holiday and I'm hearing an odd noise from the rear. What is the best way to check the rear bearings on these lovely cars? Should it leave the wheel on and just yank on the it or should I take the wheel and drum off and just move the hub...

    Last Post By: siteunseen 26 Minutes Ago Go to last post
    rossiz

    2 1/2" shop built exhaust sounds great

    Thread Starter: rossiz

    there are dozens of exhaust posts out there, but i couldn't resist adding to the mix... just finished rebuilding a good portion of my motor (n42 head, shaved intake, new injectors, etc. new cam chain/sprockets) and put on an msa 6-2-1 header. after reading up on other peoples experience i...

    Last Post By: Blue 1 Hour Ago Go to last post
    Mike

    QotW: What’s the coolest “chick’s car”?

    Thread Starter: Mike

    09-02-2014 12:44 AM Fairly or not, many JNCs are labeled “chick’s cars” because they are compact, sport inoffensive designs, and embody*performance in ways more civilized than*spewing*a boatload of HP. Besides, what’s so bad about being*a “chick’s car” anyway? What’s the coolest “chick’s car”? …...

    Last Post By: Mike 3 Hours Ago Go to last post
    Oiluj

    Really? $185

    Thread Starter: Oiluj

    $185 for door welting w/o rubber seal? Datsun 510 240Z Door Welting Set New | eBay I can buy the same thing, (or very close), from McMaster-Carr (Style 6 or 9) McMaster-Carr

    Last Post By: bartsscooterservice 4 Hours Ago Go to last post
    azriel_strife

    Cam suggestions for my build

    Thread Starter: azriel_strife

    Hi guys, I have a 72 240 with a 2.9 stroker. F54 flat top block and N42 head. Dual Z Therapy SU's with SM needles, nismo motorsport 6-2-1 header, 2.5 inch exhaust all the way, port matched intake and exhaust. its got a stock l28 cam in it however, and it falls on its face around 5500rpm, and has...

    Last Post By: LeonV 5 Hours Ago Go to last post
    Captain Obvious

    Parking Brake Handle Return Spring

    Thread Starter: Captain Obvious

    One of the things that's always bugged me was the lack of a return spring on the parking brake handle. The first couple clicks on my car were completely loose and floppy and the handle would rattle a little over bumps when driving because there was really nothing to hold the handle down. So I fixed...

    Last Post By: rossiz 5 Hours Ago Go to last post
    Virto

    78 280Z - no injector pulse

    Thread Starter: Virto

    I'm starting this thread as a bit of a placeholder, moving this issue out of my old exhaust manifold/status thread since it's likely I'll need help. The background is listed in the exhaust thread, so I'll keep it focused on the EFI here. Bottom line, car hasn't run in a year, head was pulled...

    Last Post By: Virto 5 Hours Ago Go to last post
    mossy

    240z ignition problem

    Thread Starter: mossy

    Got a problem on my 240z ignition, if i hold the key to crank it, all it will do is continue cranking but if i release it, it will start.

    Last Post By: mossy 6 Hours Ago Go to last post
    superlen

    HellFire Status & release date annouced

    Thread Starter: superlen

    The Zfuel thread was getting kinda long, so I thought I would start a fresh one along with the new update. The original thread is here: http://www.classiczcars.com/forums/fuel-injection-s30/49964-zfuel.html Well, today the HellFire ECU ran my Z quite nicely using 100% stock components (including...

    Last Post By: mjr45 7 Hours Ago Go to last post
    mjr45

    Garage Gremlin has struck again!

    Thread Starter: mjr45

    My garage gremlin has once again attacked my 75 280Z with 79ZX dizzy. Last week on start up it ran like crap, very rough, wouldn't idle and died. 2 hours later it started up and ran normally, then yesterday the same rough idle and dieing on start up, waited 2 hours and the same thing, rough etc. So...

    Last Post By: mjr45 8 Hours Ago Go to last post

Search Engine Optimization by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87