240Z Parking Light upgrade harness's for Sale

[Zs-ondabrain]

I am now selling the "Parking Light Upgrade Harness" that was mentioned earlier this month. After a lot of research and as far as I can tell, It will work on all 240Z's. If the 260Z or 280Z's headlight switch's plug are anything like the 240's, the new harness might even work for them as well. not sure yet.

I'll do some more research on the 260 and 280Z's, but for now, I'm ready to take and recieve orders. And now for the final price, which has the S/H included in said price. After ordering, TAX, assembly labor and every thing else I put into these harness's, the final price is.......

$37.00 inside the lower 48 states. The price will obviously be higher if I have to ship it over borders or oceans. If this price seems too high, consider the following supply list and prices I pay to make the harness,

The kit includes...
7.5 ft of black 12 ga. wire ($1.00)(black blends and looks more stock than red)
1 fuse holder with a 15 amp fuse ($1.50) (for safety)
1 30/40 automotive relay ($3.00)
1 relay socket ($0.75)(makes changing the relay easier and less confusing)
2 OEM style 6 pin sockets (1 male ($5.00) and 1 female ($5.50)
16 new solid brass terminals (aprox. $0.40 each) totaling ($6.40)
1 simple page of instructions
For a total of $23.15
in parts, and thats not even including tax or labor or shipping.

I will also post installation sheet on this forum so people can see how easy it is to install.

MONEY ORDERS ONLY!!!!! I Don't want to use my paypal cause it's a pain in the azz and cost too much to use, So DON"T Paypal me!!!!

I generally use Priority Mail from U.S.P.S. Please remember to CLEARLY print your return address so I know who to send it to. I'm looking at about a 1 week turn-around (which means about 1 week from the time you put your money order in the mail to the time you recieve your new harness)

Make out and send your ($37.00) money orders to me (David W. Irwin) at..

David W. Irwin
6421 105th St. N.E.
Marysville, WA. 98270

Here is a picture....

[montoya_fan01]

Dave, PM on its way to you.

[Zs-ondabrain]

Dave, PM on its way to you.


Got it and responded. Thanks in advance,
Dave.

[Zs-ondabrain]

Here are the instructions that I wrote up in a hurry, for the new harness.

Did I miss anything?

Dave

[nwcubsman]

Dave,

Please check your PM for my message as well.

[hls30.com]

Dave,
Are you still taking Paypal?
Will

[Zs-ondabrain]

MONEY ORDERS ONLY!!!!! I Don't want to use my paypal cause it's a pain in the azz and cost too much to use, So DON"T Paypal me!!!!

Make out and send your ($37.00) money orders to me (David W. Irwin) at..



Sorry for the inconvenience but They charge me to use it and it's easier to cash a money order and not have it show up on my I.R.S Audit.

[hls30.com]

Sorry,
I missed that-reading too fast.
I'll send a check.
Will

[Zs-ondabrain]

I built the first few with my own money, so I can't have more in stock until I start seeing some funding my way.

Thanks for all the P.M.'s. The sooner you order, the sooner I can order parts for the harness's. I have a couple made up at the moment.

[Zs-ondabrain]

Sorry,
I missed that-reading too fast.
I'll send a check.
Will

No worries Will, I do it all the time. (read to fast):stupid:

Dave.

[Zs-ondabrain]

P.S.

If any one has access to both 240Z's and 260Z's or even a 280Z and can compare the 240z's headlight switch's 6-pin plug to that of the 260 and 280z, I'll bet I could expand the parking light harness to that area.

The main thing I'm looking for is "where the green wire w/ a blue stripe and the green/white stripe wires are located in comparison to the 240Z's headlight switch 6-pin plug. Any help would be greatly appreciated by more than just me.


Thanks in advance,
Dave.

[texasz]

So if I'm understanding the information here there is no cutting/tapping/splicing of the original wiring correct? This is avoided by use of the white molex connectors right?

[montoya_fan01]

So if I'm understanding the information here there is no cutting/tapping/splicing of the original wiring correct? This is avoided by use of the white molex connectors right?
I asked Dave this question in a PM and he confirmed that you wouldn't have to alter the OEM wiring.


Garth,
The only thing you have to do is run a fused power wire from the battery, through the firewall (using the stock rubber gromet, Through the dash and over to the steering column and into the relay socket.disconnect the 6-pin plug on the headlight switch, connect the new plugs to both ends of said plugs (in the form of a "T"), mount the relay and ground wire using one of the four bolts holding the steering column in place, and you're done.

No cutting, tapping or anything complicated or destructive to the Z. (I promise) the harness can be removed as easily as it went in.

look at the picture on the ADD and you'll see the mounting hole for the relay, the "T" connection and the wire that connects to the battery via a ring terminal. The whole thing will take less than a half an hour.

How's that,
Dave

[Zs-ondabrain]

the only thing you have to do to the car is put a wire thru a rubber boot, bolt a wire to the positive terminal, mount a relay with a stock bolt, and remove one plastic panel and put it back on after you have made a connection to the headlight switch.

That's it, I designed it with you and the sanktity of your Z in mind.

Dave.

[kinfish]

Great job on both the design on the relay system and also the instructions. Based on the quality of the headlite relay system for which I was one of your early customers, I will send you a money order for this system. I'm looking foward to some better illumination for my gauges ........ using a flashlight at nite for my aging eyes is rather crude.

You are providing the 240Z community a great service for a very reasonable price. Keep up the good work!

[Chefling]

[QUOTE=Zs-ondabrain]P.S.

If any one has access to both 240Z's and 260Z's or even a 280Z and can compare the 240z's headlight switch's 6-pin plug to that of the 260 and 280z, I'll bet I could expand the parking light harness to that area.

The main thing I'm looking for is "where the green wire w/ a blue stripe and the green/white stripe wires are located in comparison to the 240Z's headlight switch 6-pin plug. Any help would be greatly appreciated by more than just me.

Dave-
I'm looking at a 77 280 switch and this is how it looks on the switch side of the plug.
Reading counter-clockwise from the mark the wires are coded as follows:

1 - Blue
2 - Yellow with Green stripe
3 - Blue with Yellow stripe
4 - Green with Blue stripe
5 - Green with White stripe
6 - Blue with Red stripe
B - Red with Blue stripe (I think it said "B" on the diagram)
- not used
L - Yellow with Black stripe
W - Blue with white stripe

_________
/ o | o x o o \
| o | o o o o |
--+----------

Hope this is any help.
I'd be interested in one of your kits as well for my 78.

Allen

[Zs-ondabrain]

unfortunately, It sounds like the 280Z plug is a 10-pin plug, Not a 6-pin like I would need it to be.

I'll have to do some serious research on that one to even start on making one.

Thanks anyways:(

Dave.

[Zs-ondabrain]

I'm off to town tomorrow to get a butt-load of parts for the parking light harness's and then I'll start making 'em like wild fire. Why? you ask. Cause I love you guys!!:love:

Dave

[Zs-ondabrain]

couple things, The more orders I see (on here or thru E-mail or P.M.'s) the more parts I'll order and harness's I'll make. But I need to know the "want" before I try and fill the "needs"

A little reminder, They are $37.00 and that also covers S/H costs.
And for those of you who have written me asking for a little something on the side (wink. wink.) I can only make them when I have the funding.:ninja:

Dave.

[hls30.com]

Dave,
Just what "little something" are you being asked to do on the side?
Nudge, nudge, wink, wink, know what I mean, know what I mean...
Will

[texasz]

Yes, please share!!

I am interested in this part by the way. :)

[Zup]

:eek:

ME 2-3-4-5----!!!!!

I don't care where I am on the list, but I'm willing to wait.:nervous:

[mr24shoe]

I'll also be ordering one in the near future...

[GatorJ]

My m.o. will go out in the morning's mail. Thank you.

[Zs-ondabrain]

I wanted to say thanks to all of you who have raved, bragged, and given good and great reviews about the "headlight relay upgrade harness"

I just spent 2 hours looking over every forum on headlights, harness's and anything else pertaining to the subject. I read more than a few reviews out loud to my wifeand she said "you must be doing something right, for them to write all that and even defend your harness to others".

Few more things...

Jim Coffey, You check was recieved and your "parking light harness goes in the mail today. Thanks for being the first on this new venture of mine.

Bryan Pilati, Thank you soooooo much for your patience, Your harness is boxed and being shipped out today.

Bryan Ray, I got your money order and your harness's should be in the mail by mid next week (around the 2/1/06)

Thanks again to every one who has been involved in any way, shape or form in the ordering, making, and reviews of the headlight and parking light harness's.

Much love and appreciation,
Dave in WA. State.

[JZM]

DAVE
I'll take four units.I'll also need four head light harness's too.
{if you'll make some ...PLEASE.}

Why so many? so that I/ we can advertise your product at z sport!

G.W.W IS VERY IMPRESSED.

JZM

[Zs-ondabrain]

I made an order this morning and should get some more parts by tomorrow afternoon. I'm working on it. Keep the orders coming, I have'nt worked for my other boss in a couple of weeks now. So this is my only income, and it keeps me at home where I should be.

Thanks guys,
Dave.

[Zs-ondabrain]

SavannahZ.. I got your M.O. and your harness should be in the mail later on today, If not early tomorrow. Thanks for your order.

Dave.

Update: see below

[Zs-ondabrain]

Got some bad news, My supplier just called and said that the order that I made on thursday morning did'nt go out all day long, Some B.S. with the shipping department.

So he said that the order went out today and will most likely NOT be here till MONDAY!! May not seem like a big deal to most, but I really wanted to get them made and DELIVERED to you guys on Monday.

So, we're already getting delays, damnit :mad:

Sorry guys,
Dave.

[Zs-ondabrain]

SavannahZ- Your harness will be mailed out tomorrow.

Ron Stevens- Your harness will be mailed out tomorrow.

Thank you both for your orders, they were both prompt and appreciated.

I'll try to keep doing it this way so you can check here to see if your order has been filled. It also keeps you from having to personally write me and then wait for a responce.

It's kinda like an on-line order tracking system, nah, not really:D

Dave.

UPDATE: both were shipped on (1-28-06)

[Zs-ondabrain]

Montoya_fan01- Your Gen1 harness showed up today and will be updated and shipped with you parking light harness on Monday or Tuesday.

Dave.

[Zs-ondabrain]

Garth, (Montoya_Fan01) When I ship your harness's out to you, should I put anything like
"C/O Garth _-_-_-_" ?? I don't know your last name nor did you put it anywhere on the package or anything else. Email me with that info please.

Gary of Spokane, WA. If all goes well, I should be able to ship your harness out tomorrow.

Gary of Oroville, WA. Same thing but on both harness's.

Bryan Ray, Most likely tomorrow as well.

Any one else interested in the harness can E-mail me at wolfin32z@yahoo.com
I'll get back to you A.S.A.P.

Thanks guys,
Dave.

[SavannahZ]

Just wanted to say thanks for the fast shipping and the excellent quality product. Now that I have installed both of your wiring harnesses I can see much more clearly. The install was very easy and I'm glad in the end that I didn't have to cut into any existing wiring. I brought my wife outside for a second opinion and did the before and after setup and we both noticed a substantial increase in not only the parking lights, but the dash lights as well.

Thanks again,
Jonathan

[eulb1]

Dave
I sent you a money order today for 1

Thanks in advance

Bryan

[Zs-ondabrain]

Just wanted to say thanks for the fast shipping and the excellent quality product. Now that I have installed both of your wiring harnesses I can see much more clearly. The install was very easy and I'm glad in the end that I didn't have to cut into any existing wiring. I brought my wife outside for a second opinion and did the before and after setup and we both noticed a substantial increase in not only the parking lights, but the dash lights as well.

Thanks again,
Jonathan


Jonathan,

That is one of the most complete positive feedbacks I've ever gotten. Thank you very much, I think I'm blushing:love:

You hit all the highlights. You mentioned shipping, ease of install, It's benefits, and after all that, you even got a second opinion on there as well.

I'm SOOOO happy that you're happy with the product. There is no better advertisement than "word of mouth" Thank you, to all who have said good things about the harness's I make and the way I do business. My mother was right when she said "Do unto others as you would have done unto you"
It's the best philosophy when running a small business. She also said "If you make a product, Make a quality product that even YOU would want to buy"
She knows how damn picky I can be.

You're all very welcome and THANK YOU ALL again!

Dave.

[Zs-ondabrain]

Gary of Oroville, WA. Same thing but on both harness's.

Bryan Ray, Most likely tomorrow as well.




Sorry guys, U.P.S. is now officially on my sh_t list. I wont get the parts I needed to finish your harness's till wednesday. Which means I'll be able to finish them that night and get them out the door on thursday.

David Honeycutt, Your harness should go out on Tuesday, if I get a chance.

Joseph Davis, Your harness should also go out on Tuesday, if I get a chance.

Garth, your harness's will be shipped when I ship David's and Joseph's.

Sorry for the small delay! Thanks again Jonathan,
Ron stevens- you should have yours by now, Let us know how it went.

Dave

[7T1240]

Gary of Spokane, WA. If all goes well, I should be able to ship your harness out tomorrow.

Dave,
Thanks for the update. I just kind of stumbled over this as I was not previously subscribed to this thread.

Regarding the parking light harness, it is my intention to get a money order coming your way Tues 1/31 p.m or Wed 2/01. I like the 'plug and play' style of this latest design.

Regards, Gary S.

[Zs-ondabrain]

It's not totaly plug and play. You do have to mount the relay and run the power wire from the battery, thru the firewall, then thru the dash and into the relay socket. But I get your meaning. Glad you like the idea and design.

Dave.

P.S. To all those who either have or are getting the parking light harness, I forgot to mention that it's easier to plug the power wire's terminal into the relay socket if the relay is removed first.

[mlc240z]

PM on it's way.
Do you foresee any problems piggybacking the power wire to the headlight harness connection?
thanks

[Zs-ondabrain]

PM on it's way.
Do you foresee any problems piggybacking the power wire to the headlight harness connection?
thanks

What would you piggy back the power for? Are you adding something?
Help me understand. Sorry bout the straight forward questions but Bryan Pilati is killing me with questions that my 8 year old daughter could answer.:tapemouth

Questions like this...

"I don't see where this is intended to improve the dash lights. It's for the marker/parking and tail lights.
__________________
Bryan Pilati
I'm never serious unless I should be.
__________________________________________________ _______________

Dave

[montoya_fan01]

Dave, I think mlc240z might be meaning that the power wire for each of the two harnesses connects to the + terminal of the battery. (If I'm reading everything correctly)

[Zs-ondabrain]

Never mind, I was having a "Pilati" moment. Your talking about piggy backing the parking light harness's power wire onto the headlight harness's power wire.

Essencially, They both use the bolt on the batteries positive terminal. But keep this in mind, the PLH's fuse and wire go behind the battery and are almost unseen, where as the headlight harness's power wire goes towards the front of the car and runs along the battery wire that goes towards the battery, until you get to the frame, then it goes forward and into the relay pack on the V.R.

Hope that helps,
Dave.

[mlc240z]

yup, that's it.
2 harnesses, same place on the + cable. i can't see any problems, just making sure.

[EScanlon]

(In reference to why the Dash Lights get Brighter...)

Explain it like this: Ever seen that joke they act out on TV, where they go flush the toilet when someone's in the shower to see if they actually ARE in there, and you hear a yell? That's the same thing.

LOL ROFL

E

[EScanlon]

Dave, I think mlc240z might be meaning that the power wire for each of the two harnesses connects to the + terminal of the battery. (If I'm reading everything correctly)

I agree. That's where the "difficulty" comes in.

I've always been told to only put ONE Spade connection in between every PAIR of washers when working with electrical connections. Putting two connectors directly one on top of the other is a prescription for problems, ESPECIALLY if one doesn't separate them via washers...OR...use Washer Connectors. (If my terminology isn't precise, please correct me.) This is because the nut / bolt cannot compress evenly around it's circumference and the result is that one or both connectors are compressed OUT of the connection. When dealing with electricity....this is another term for "FUSE".

There is yet another solution, use a replacement NEGATIVE Battery Post Cable connector instead of the POSITIVE Battery Post Cable Connector. The difference? The REPLACEMENT part (available at your local parts house) will a LOT of times already have a smaller (8-12ga) wire crimped (or molded) into the battery clamp. You can then use standard wiring connectors to crimp several lighter gage wires in to the larger gage cable connection.

Remember with a strong predominance of Negatively GROUNDED vehicles operating, a replacement part from the parts house will usually have the wire for that connection. The Positive cable connector usually won't as most connections are the "plug into your fuse box" variety.

This type of connection that you are making with this or the other relay is to provide an ADDITIONAL circuit NOT dependent on the original fuse box. That original fuse box is half the reason for needing this harness, the other half? The combination switch.

This is the total beauty of Dave's system, it incorporates, in a seamless and restoreable fashion, the ADDITION of a circuit to the older system that actually IMPROVES the function of the older circuit.

E¢

[mlc240z]

i love having the 'problem' of connecting TWO of Dave's harnesses.

heh heh heh

[Zs-ondabrain]

Or Try Something Like This.

[nwcubsman]

Sorry guys, U.P.S. is now officially on my sh_t list. I wont get the parts I needed to finish your harness's till wednesday. Which means I'll be able to finish them that night and get them out the door on thursday.

...snip...

Hey Dave,
I understand your effort towards customer service, and I appreciate it, but really, no worries!

BR

[Zs-ondabrain]

Just letting those of you know that I'm on my way out the door to make some deliveries. YEAH!! I SHOULD get my parts order in, and that will allow me to finish the rest of the orders that I have in so far.

Dave

[Zs-ondabrain]

Sorry guys, U.P.S. is now officially on my sh_t list. I wont get the parts I needed to finish your harness's till wednesday. Which means I'll be able to finish them that night and get them out the door on thursday.

David Honeycutt, Your harness should go out on Tuesday, if I get a chance.

Joseph Davis, Your harness should also go out on Tuesday, if I get a chance.

Garth, your harness's will be shipped when I ship David's and Joseph's.

Dave


SO MUCH FOR THAT B.S. UPS failed to show up again!!!! Those F%$#@ :tapemouth guys are going to get an ear full from me. I know you guys keep telling me not to worry or be in a big hurry but I ABSULUTELY HATE being made out to be a liar.

I tell you guys info according to what I'm told, then I get bent over and told "oops, It won't be there for another day" which makes me look like a liar, then I have to apologize to those of you who were expecting to put your haness's in this weekend. Hell, if I was told that I should have it by friday, It damn well better be here by friday cause I would most likely make pans to put it in on that SAT. See what I mean?

Sorry, Just had to vent a little:tapemouth

Dave.

[montoya_fan01]

I know exactly how you feel Dave. I get smoke blown up my a$$ by FedEx Ground every week. "It'll be 'there' (OH, NC, AZ, WA, or wherever) on Thursday" they say, and I track the shipment, only to discover that it hasn't left even the Sacramento Terminal by Thursday. I call FedEx and they say, "I don't know what happened to your package, I'll put a trace on it." Four days later they call and tell me that there was "a Trailer Fire last Monday and all the contents were destroyed, you need to file a claim." :rolleyes: Now why couldn't they have told me that last Thursday??? Pi$$es me (and my customers) off!

Sorry that you're distressed, but try not to let it ruin your week. I can wait for my harnesses without a problem.

[Zs-ondabrain]

I'm only 5'6" and 135 lbs. I don't have the required capacity for the amount of smoke they're trying to blow up my a$$. Makes me wonder why I pay more to have it shipped thru them. OH YEAH, maybe they think I have money to burn and all the time in the world. RIIIIIIGHT!!

[Zs-ondabrain]

I still have them for sale if anyone is interested. I'm looking at less than a 1 week turn around. Still waiting for some previous customers comments on the Parking light harness. I need to know these things.

Dave.

[zhead240]

let me know when u get my M O. mailed it jan 26.

[kinfish]

Dave,
Received my parking light harness mid week as promised.
Again I am impressed with your attention to detail. Another top quality product.
Didn't install yet but will give feedback on light intensity when I do.
Only comment is that you used a 3/16 dia ring connector to the battery positive. On my Z, I converted to marine type battery terminals which utilize stud and wingnut. The positive stud is 3/8 dia and hence the ring doesn't fit. Your headlight harness used a larger terminal and fit OK. No big issue with me ...... I will either use as is and connect under bolt holding terminal to battery or change the ring connector.

[Zs-ondabrain]

Dave,
Only comment is that you used a 3/16 dia ring connector to the battery positive. On my Z, I converted to marine type battery terminals which utilize stud and wingnut. The positive stud is 3/8 dia and hence the ring doesn't fit. Your headlight harness used a larger terminal and fit OK. No big issue with me ...... I will either use as is and connect under bolt holding terminal to battery or change the ring connector.


Actually, I used a 5/16" ring (bigger than 1/4" and smaller than 3/8")
Cut the ring in the outer most middle and open it a little. You'll get the same contact. It's not a real high current system, so don't worry too much about it hurting the performance.

Glad to hear you got it, let us know when it's in and how it works for ya.

Dave.

[/QUOTE]zhead240 let me know when u get my M O. mailed it jan 26. [/QUOTE]

Sorry bout that Patrick, I did get it and I already shipped both of your harness's TODAY. "Should be there in 4 to 7 days" (thats what the lady at the Post office said.

I also shipped out harness's for.......

Bryan Ray, 2 harness's on the way.
Gary Saling, 1 harness on the way.
Gary DeVon, 2 harness's on the way.
Bryan Toews, 1 harness on the way.

Thanks for your orders guys.

Jim and Juan, Yours should be out early next week,

Dave.

[zhead240]

when do u sleep?LOL man that was fast! no problem cash'n the M O?
thankyou very much. i'll let u know when it arrives.

[dhoneycutt]

SO MUCH FOR THAT B.S. UPS failed to show up again!!!! Those F%$#@ :tapemouth guys are going to get an ear full from me. I know you guys keep telling me not to worry or be in a big hurry but I ABSULUTELY HATE being made out to be a liar.

I tell you guys info according to what I'm told, then I get bent over and told "oops, It won't be there for another day" which makes me look like a liar, then I have to apologize to those of you who were expecting to put your haness's in this weekend. Hell, if I was told that I should have it by friday, It damn well better be here by friday cause I would most likely make pans to put it in on that SAT. See what I mean?

Sorry, Just had to vent a little:tapemouth

Dave.

No worries mate (As they might say down under) When it gets here is cool with me.

[kinfish]

Dave,
You are right ....... the ring connector is 5/16 dia!
That is what I meant to write but somehow it came out 3/16 dia on the thread.
I will try your quick fix to cut and open slightly.
Thanks for feedback.

[gogriz91]

Check went in the mail today Dave, should be there by Thursday

[Zs-ondabrain]

Just letting you guys know that I have gotten a few more orders than expected and ran out of supplies. I'll order them on monday and should be able to have the harness's in the mail by late wed. or thursday.

Bart Evans, I got your order and wanted to throw in a little extra "THANK YOU VERY MUCH" I'll get that to you as soon as possible. And P.S. I don't think that you'll actually go Blind by the brightness of your lights after the install. Just wear some sun glasses. You'll be ok! I promise.

Gary Saling, Your second harness will go out the door as soon as Barts does.

Both of you are "repeat" customers and I wanted to say thank you again, Having repeat customers means I must be doing something right.

Dave.

[7T1240]

Gary, Your second harness will go out the door as soon as Barts does.

Both of you are "repeat" customers and I wanted to say thank you again, Having repeat customers means I must be doing something right.

Dave.

Thanks Dave, I appreciate being kept in the loop. I'm hoping harness #1 will show up on Monday! Also, today I was looking for some electric connector boots for my fuel level sender at a store called West Marine. While there, I came across this "Battery Direct Connector"http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/19483with this catalog description:
Brass terminals provide a safe and secure way to connect up to four interface-sensitive instruments directly to your battery.
Positive and negative quick-connect terminals are included

Positive (red):3/8" ID

Negative (black): 5/16" ID

Dave, do you see this as being a viable option for connecting these harnesses directly to the battery, or just an unnecessary do-dad?

Gary S.

[mlc240z]

i'll just have to go blind the old fashioned way.
(nudge, nudge, wink, wink, say no more, say no more)

take your time, i'm starting the rear suspension (gulp) anyway.

[Zs-ondabrain]

I'd say un-neccesary do-dad. The ring connectors take up very little space and thats a good thing when it comes to the space available near the positive post on a Z.

If your gonna do something like that, I'd say go with a "remote power terminal" You connect a heavy guage wire to the (+) post then run it over to a distribution block that allows for connection to the positive without having to load up on top of the battery. It's a little safer but only needed if you have a lot of things (accessories) going to the battery.

Dave.

[Zs-ondabrain]

I'm gonna head out this morning and get more supplies. I'll also be ordering the othe supplies for for future orders.

My supplier is already trying to up his prices but after informing him that I had NO problem taking my business else where, He changed his mind. I seem to be one of the few people even buying these connectors from him.

If you or any one you know would like a parking light harness, Please feel free to contact me at any time with your order or questions. @ wolfin32z@yahoo.com

I check my mail at least 6 times a day and reply to messages as soon as time permits.

Dave.

[Zs-ondabrain]

here we go,

James Coffey, It goes out on tuesday (2/7/06

Juan Garcia, same thing

Gary Saling, same thing again,

Bart Evans, yours too, goes out tomorrow.

CLIFF WOOD, WHAT IS YOUR SCREEN NAME HERE??? I NEED TO P.M. YOU WITH SOME INFO.....PLEASE E-MAIL ME A.S.A.P.

Quentin Yarie, It might go out by friday, (fingers crossed) waiting on more parts.

Thank you all for your orders and PLEASE let me and EVERY one else know how the whole process went for you. Instal? ordering? pricing? performance? whatever.

Thanks in advance,
Dave.

[HarrisonTX]

What does the product do?

[dhoneycutt]

Dave,

Got it in the mail todayLOL THANKS. Unfortunately it won't be until later this week before I get it installed. :tapemouth :tapemouth :tapemouth If it helps half as much as the headlight harness does :love: I will be in 7th heaven. Thanks for the excellent products you make/made for us... If you guys don't get these while he is making them you are missing out.

[Zs-ondabrain]

What does the product do?

this link should clear that question up. unless any one else wants to chip in here.

http://www.classiczcars.com/forums/showthread.php?t=19976&highlight=parking+lights

[Go240Zags]

Hey Dave, got both harnesses yesterday and they look quite professionally made. Now to just get the car done so I can install them. It might be a year or two yet, but they'll be there when I need them.

[Zs-ondabrain]

Just a FYI--

When I went to Napa to get some 5 amp fuses for my headlight fuse box fuses, they were out, so I got 4 amp which they had; haven't had any problems with the 4 amps....this has got to be one of the best upgrades I've ever done on my Z. Sending my MO for the running light upgrade today!!!



I figured that this would look better over on this forum. I knew that a 4 amp fuse would work but figured that a 5 amp was just as safe and would give a back up for any alternator burps. (surges)

I'm on my way to ship Mr. Yarie's order off to canada and I may have a surprise for a few of you. Give me some time to figure it all out and i;ll write about it.

Dave.

[Zs-ondabrain]

As mentioned earlier, I have a surpriZe for some of you.

As of right now, I am taking orders for the "headlight relay upgrade harness" that I used to make. I'll write a new forum on the matter, so watch for it.
Dave.

http://www.classiczcars.com/forums/showthread.php?p=161987#post161987

[mlc240z]

Dave, got the harness today.

Dude, you are to be congratulated on the professional job you do.
GREAT WORK!!!
if Datsun had you in the early '70's, we wouldn't be nagging you now. it would have been done right in the beginning.

i was going to start the rear suspension this weekend, but the dreaded IMAW/WIAI's struck on the parking lights. new relay/harness requires refurbed front fixtures, lenses (rears were already done). since ease of access required removal of front bumper, now also doing bumper mounts, brackets etc. etc. etc.
i'll let you know how the harness turns out but i'm probably safe by saying 'HOLY SH*****T' right now and just getting it out of the way.
thanks again

[Zs-ondabrain]

Thanks, that's a real nice compliment. Let me know how it goes.
Dave.

[Zs-ondabrain]

I'll be making a big order today so I'm ready for the orders when they come in. I'll spend most of this week-end doiung prep work to keep up with you guys.

Thanks for your orders and I'll try not to dissapoint,

Dave.

[gogriz91]

Dave, has my check shown up yet? I mailed it last Saturday..just curious, not trying to rush the process.

[Zs-ondabrain]

Dave, has my check shown up yet? I mailed it last Saturday..just curious, not trying to rush the process.

It just showed up today (friday) and I should be able to ship on Monday.

Thanks for the check but I really prefer MONEY ORDERS.:classic:

Thanks again.
Dave

[Zs-ondabrain]

Can anyone here give me info on the 260Z headlight switch plug???

1) is it a 6-pin like the 240Z
2) if so are the wires similar to the 240Z's wire in the whole green/blue in, green/white out.

if someone can tell me, a few more people (260Z owners) can join the family of night drivers.

do they look any thing like this?.... or the right side plug on the 2nd picture?

[gogriz91]

Sorry 'bout that Dave, I read over the money order part in your original post. Got a little over excited there.

[Zs-ondabrain]

Don't worry bout it, Just don't let it happen again or the happy face gets it:stupid: :stupid: :stupid:

Hey Will, I got the M.O. taday (Sat.) and i'll try to get it out to you on monday.

[hls30.com]

Gr8! Thanks,
Will

[bpilati]

I finally installed my headlight relay harness. First class product, Dave. Once I found the correct screw hole to mount the relay pack, it went pretty easy. It was a bit tricky trying to get my grinder down in there to clean that metal, but I did it. Thanks again.

[Zs-ondabrain]

O.K. great! But now that it's in, what were the results?
Are your lights brighter?
are your fuses getting as hot as they use to?
How long did it take in total to put in the harness?
How can I improve on it?

Would you suggest it to a friend? These are the questions that most people who look at this, are going to want to know. The reason most people look at a forum is because they have or had a similar problem or can at least relate to the subject.

The more answers we give (voluntarily) the less questions they will ask. So if you have installed any upgrade, whether it be from me, Motorsport Auto, the guy down the street or your own design, Let us know the "why's", "How's" testing and results!!

Just remember that "Neccesity is the MOTHER of all Inventions"

Dave.

[Zs-ondabrain]

Hey JZM,

As soon as my relays come in, I'll have some Parking light harness's for Z-Sport's Consignment Shelf.

Dave.

[JZM]

Gee Shanks!!!!!

[Zs-ondabrain]

For hose of you who would like to know what the plug looks like before taking off the steering column cover, Here's a picture of the plug that comes from the headlight switch.

The usual wire in question is the lifted one, It sits in the middle on the same side as the indentations (that only allow the plug to go in one way)
it's green/blue stripe comes from the switch and into the plug then turns green/white on the other mating plug.

[montoya_fan01]

The usual wire in question is the lifted one, It sits in the middle on the same side as the indentations (that only allow the plug to go in one way) it's green/blue stripe comes from the switch and into the plug then turns green/white on the other mating plug.

"usual wire in question"? I'm a little confused, what is the question? can anyone explain what I'm missing here?

[Zs-ondabrain]

"usual wire in question"? I'm a little confused, what is the question? can anyone explain what I'm missing here?

I was P.M.'d with questions about the output "wire" that comes from the switch to the parking lights, dash and side markers. the pic. identifies the wire that is "usually" in question. That is also the wire I use in my relay harness.

Feel smarter? I hope so, cause my fingers hurt from doing harness's all day, which makes it hard to type.

Dave.

[Zs-ondabrain]

Guess who finally called me. That's right UPS called me three days after I was supposed to get my package to finish these orders.

Then they have the nerve to tell me "it won't be to your house till 6pm this evening". I reamed the hell out of her and demanded delivery of my package NOW. She's going to call the driver and find out where he is at this very moment, Then I'LL GO MEET HIM AND GET IT MYSELF.

I could have driven to southern California (from northern Washington) and picked the order up and got home by thursday MYSELF. Screw U.P.S. I'll never be using them again, ever!!

Sorry guys, Just venting again, the orders should be in the mail by Tuesday morning. Unless I get hit by a fricken truck or something :mad:

Dave.

[bpilati]

Dave, I think I wrote somewhere that my lights are brighter. It works as advertised. I never had the hot fuse problem though.

[Zs-ondabrain]

So anyways, UPS finally showed up and the driver did'nt look very happy with me, WAAAAH!

Here are the harness's that I finished and delivered today...

Cliff Wood, 1-PLH & 1-HLH
Mike Gard, 1-PLH & 1-HLH
Dave Cherry, 1-PLH
Sam Starr, 1-PLH
Ruben Whittemore, 1-PLH
Peter Van Der Pas, 1-HLH
Kenneth C. Lewis, 1-PLH & 1-HLH

Thanks for your orders and tell your friends!:cheeky:

Mike Wang, got your PLH order and will ship asap
Richard Ecker, got your order for 1-PLH and 1-HLH and will ship asap
Brad Proudfoot, Your Canadian order will take a little longer, but you probably already knew that. Thanks man!.

Thanks again guys, let us know when you get 'em and put em in.
Dave.

[Zs-ondabrain]

Mike Wang, got your PLH order and will ship asap

Richard Ecker, got your order for 1-PLH and 1-HLH and will ship asap

Brad Proudfoot, Your Canadian order will take a little longer, but you probably already knew that. Thanks man!.

Dave.


I kicked butt all day and finished 'em all. All 3 will be delivered tomorrow (2/23/06) They'll go out Priority Mail thru USPS and should only take 2-3 days. Some of you should have your package before the week-end is up.

Brad, I checked with the Post office and they said 4 to 7 days to your location. don't worry, $15 value on the box. I got ya covered. I hate taxes as much as the next guy.

Thanks guys, tell your friends and let us know when ya get 'em and put them in. I love to hear the results.

I'm trying to make a small surplus of harness's, so if you're thinking of buying one of the 2 ( or both) harness's that I make, Now's the time.

Thanks again guys,
Dave.

[Zs-ondabrain]

Things have slowed down a bit, so if your thinking about ordering either harness's from me, I've got time on my hands.

By the way, I DO combine shipping on multiple orders now. If you know of a 240Z in need of a harness, or thinking of a gift for your friends in a Z-car club, brighter lights may be just what they're looking for.

Dave.

[gogriz91]

Since the initial rush seems to be waning here Dave have you thought about posting on ZCar.com or Hybridz.org since there are probably some Z owners who don't hit this site but might hit those instead?

[Zs-ondabrain]

Carl Beck was very kind in introducing the headlight harness on his site. There are a few sites that I keep wanting to put the advertisement on but keep forgeting, I guess nows as good a time as any.

[Zs-ondabrain]

I'll have parts in by wed or thursday for those of you who are waiting for a good time to order your harness'(s)

Don't forget that I am also offering the foglight attachment for an extra $25.
It's integrated into the headlight harness so you only see an additional relay and two wires for the foglights and 1 little input wire that goes to stock fog light wire near the healight plug.

Use the links below to email me or find more info,

Dave.

[Black Beaut]

Just like to add that I've now installed both harnesses to my RHD '73. I have to echo everyone else and say the quality is excellent and help from Dave is second to none! In terms of delivery I recieved my harnesses before the international tracker postage service I used said Dave had received my money order - superb! Since then Dave has been extremely helpful to an electically clueless person, answering all my dumb questions clearly. Any one else thinking that there might be an issue installing on RHD cars, don't worry, it's just as easy as on LHD!

cheers,
Rob

[=Enigma=]

Ok, Dave. I finally have the budget for this so start making up one of each for me. Check your PMs.

[Dtsnlvrs]

Dave,
Sent you an e-mail today requesting a total for both harnesses. BTW a good way to get the power from the battery is to put another ring connector and wire on the starter post and run it into the cockpit. Then install a PDB (power distribution block). I Already have one installed to power my MSD, Stereo, iPod Adapter, and soon, your relay kits.

[Mike]

Hey, can someone do a review on this product. The picture from Z's original post will do fine... Put the review in our NEW reviews area.

[retff240z]

Hi Dave; I hope that it is not too late to order a headlight and parking light harness upgrade for my '72 240Z. I can get the money order on Monday. Let me know, Ron.

[Zs-ondabrain]

Hi Dave; I hope that it is not too late to order a headlight and parking light harness upgrade for my '72 240Z. I can get the money order on Monday. Let me know, Ron.

Not a problem Ron, I just ordered parts on Thursday and should have them by early to mid week. I'll P.M. the rest to you.

Dave.

[Dtsnlvrs]

Dave,
I sent a money order on friday for both harnesses. Cannot wait to see your craftsmanship.

[Zs-ondabrain]

For those of you who are still interested in a harness but can't afford it till late april....Good news!

I will be bringing some to the MSA event on the 28th, 29th, and 30th of April in Orange, CA. They will be sold at a slight discount, especially to those who are not normally members of this site.

It will help spread the word about the harness's and about ClassicZcars.com and all the great products, people and help that they'll find here on this site.

I just posted a Pic. of me and Leah (the wife) in the gallery to help people find us while we're at the event.

So if you want one before then, let me know, or wait till the event, where I'll have about 10 of each product available to the open public.

[lww]

David, while driving back from MSA, I noticed the only thing that was missing in my night drive was nice strong dash lights. I couldn't see my tail lights, but I bet they were dim too.

I'm putting an MO in the mail tomorrow morning to complete my official "David Irwin" collection!

Thanks,
LWW

P.S.
Sorry I missed you at MSA! I spent nearly the entire day scrounging up transportation for the NOS OEM hood I picked up for $50!

[Zs-ondabrain]

David, while driving back from MSA, I noticed the only thing that was missing in my night drive was nice strong dash lights. I couldn't see my tail lights, but I bet they were dim too.

I'm putting an? MO in the mail tomorrow morning to complete my official "David Irwin" collection!

Thanks,
LWW

P.S.
Sorry I missed you at MSA! I spent nearly the entire day scrounging up transportation for the NOS OEM hood I picked up for $50!

I'll keep an eye out for it and I just put in an order for harness parts, that'll be here on Monday. Sorry I missed ya. But you probably saw my tail lights a couple of times and did'nt even know it was me (BRIGHT LED lights)

Dave.

[Zs-ondabrain]

Just a reminder, The upgrade harness's are still for sale. They are $125 and the parking light harness is $37.

I do combine shipping if you order both or multiple harness's.

Dave.

[bpilati]

Dave, I need one of these harnesses. I just keep forgetting to send the money. One of these days.....

[Zs-ondabrain]

I'm kinda like "Burger King" when it comes to the harness's. "I don't make 'em, Till you order 'em"

Or is that Jack in the Box?

Let me know when your ready

[bpilati]

I wish I could talk you into something other than money orders, they are such a pain to get.

[Arne]

I wish I could talk you into something other than money orders, they are such a pain to get.Huh? You can get 'em at any Safeway or 7-11, among other places.

[a7dz]

The drug store on every corner has money orders.

[zbane]

Don't forget Banks, Western Union, or since you'll be there anyway, the POST OFFICE!

[=Enigma=]

I hate em' too but for a different reason.........

[hls30.com]

One thing about money orders(other than USPS)-if you can't and dont cash it where it was bought, it can be refused! The only place that has to cash a Western Union money order is the main office of western Union. Except for USPS money orders, they are acutally worse than a check(every branch of a bank a check is drawn on is required to cash it as long as the money is there and the check is valid) Once again, no branch of western union except the home office is required to cash a western union money order-others are the same.
Look at the back of the Money order in the FINE PRINT!
Will

[bpilati]

I keep forgetting to buy the parking light harness. Can't get off the dime.

[TBK1]

Z's did you ever figure out the 77 set up for these harnesses (PL)?

[Zs-ondabrain]

The only thing I can suggest for the 77' is a one of my parking light harness's without the "T" plugs. Find the combo switches (parking light) output wire (which is ussually Green with a White stripe) on the dash harness side.

Find the plug for the combo switch, locate the green/blue wire, on the othe side of the plug (dash harness side) that same wire should now be green/white. Cut that wire 1.5" - 2" away from the plug. Attach the small wire from my harness to the cut wire that heads toward the plug (and switch) Then connect the larger of my harness wires to the cut wire that heads towards the dash (or away from the plug)

I'll only charge $30 for the Parking light harness that does NOT have the "T" plugs attached. If you're interested, E-mail me with a reminder of who you are and the year of your Z. ( wolfin32z@yahoo.com )

Dave.

[Zs-ondabrain]

This is a repeat of info that has been stated many times on the particular thread. THE PARKING LIGHT RELAY UPGRADE HARNESS ONLY WORKS ON 240Z'S UP TO 3/73' If your Z was built after 3/73' the only way to use my PLH or ugrade harness, is to HARDWIRE it to the green/white wire that headstowards the firewall after the 9-pin plug that the combo switch uses

Because I can't EDIT the first post, here is the "Parking light upgrade harness" instal instructions again.

Thanks,
Dave.

AND THE POST 3/73' CONVERSION INSTRUCTIONS ARE BELOW AS WELL. this is what you would look at if your 240Z has the small 9-pin combo switch plug and you want to add the PLH to it.

There are 2 different charts for the "FIX" but they say the same thing initially.

[Inf]

Last week, along with a headlight harness and rebuilt T/S and combo switches, I installed Dave's parking light upgrade harness. I was satisfied with the results, especially knowing how much current I took out of my combo switch. The dash lights appeared to be slightly brighter overall, and so long as I am above idle (and my stock alternator is making more power), they are much brighter.

Installation was fairly easy. The most difficult part for me stemmed from the fact that my passenger footwell has a big A/C evaporator there now. The evaporator is almost flush against the firewall (I would estimate a 1/3 - 1/4 of an inch gap). When pushing the power terminal through the rubber grommet for the stock wiring, I had a hard time. The fit was very tight (the grommet was much tighter than I had imagined). With some dielectric grease, I managed to get it through, but I basically had to keep pushing the wire through hoping part of it would come down below the evaporator so I could pull it out. Luckily part of the loop fell down into sight and it was easy from there.

Something that was challenging, but expected, was managing to get the steering column cover back on with the additional wiring in place. It took me a bit of wrangling with the stock wiring and the additional harness plugs in order to get the cover back on. Messing with that and dealing with the extra volume occupied by the new stock-style molex connectors was a small price to pay to avoid having to cut my stock wiring up and splice things in.

One issue I had with my harness was that the ring terminal for the power supply was slightly too small to fit over the bolt on my battery cable. I went to the hardware store up the street and picked up a slightly bigger ring terminal and some shrink tubing and replaced it in a few minutes with a pair of pliers and a blow-dryer (gotta make do without a heat gun). Your mileage may vary on this, I think I picked up my battery cables from NAPA 4 years ago or so. The provided ring terminal may fit stock style cables. The headlight harness power supply ring terminal was just right for my case though.

[Zs-ondabrain]

--------------------------------------------------------------------------------

Just a quick update to all who are interested..

I have 3 HLH's (headlight upgrade harness's) for the 240Z, in stock and ready to be shipped.

The HLH's are still $125 and are universal for ALL 240Z's

The PLH's (parking light upgrade harness) Are now $40. My supplier doubled the price of my supplies. They work on all 240Z's UP TO 3/73'

The ZXP's (280ZX alternator adaptor plug) are still $15 each and work on all 240Z's

I Still do the LED Tail Light Conversion for ALL 240Z's. The conversion is still $250. You send me your 240Z taillights and I convert them to LED. They are brighter, use less than 1/4 of the amperage and bring your Z into the 21st Century.

I also do the Combo/Turn signal Switch service. For $40, you send me your Combo and T/S switches and I rebuild them as a set. I clean up each switch, clean the contacts, fix any wiring issues, regrease them and send them back. ($75 for 2 sets)

I STILL don't take PayPal but I do take Money Orders, Casheirs Checks and Cash. Email me for shipping and Payment info at wolfin32z@yahoo.com

Dave.

[datrickysun]

do you still make to alternator converison pigtail

[Zs-ondabrain]

I still make the 280ZX alternator adaptor plug (ZXP) for the 240Z's, if that's what ya mean. They are $15 and I'll give ya the rest of the info if you email me at wolfin32z@yahoo.com

Here's the info page. http://1971.240z.home.comcast.net/extras/alt-adapt.html


Dave.

[Zs-ondabrain]

To all who were or are interested or thinking of purchasing a (PLH) Parking Light Upgrade Harness for your late 69' to 3/73' 240Z, This is your last chance!!!!

I only have 6 more available. Period.

My distributor will not be ordering any more Female plugs from his supplier unless a VERY BIG order comes in. He can ONLY order 3000 at a time and I order too few to convince my supplier to purchase the 3000 in order to continue making these for 240Z owners.

I'll do my best to keep up with orders as they come in but please E-MAIL ME FIRST before sending your order for a PLH as supplies will quickly dwindle down.

Thanks again for everyone who has ordered from me in the past and Sincerely Apologize to all who may miss out on this great upgrade.

Thanks again,
Dave.

[sleepyzzz]

Dave, did you receive my switches and money order yet?

[Zs-ondabrain]

Dave, did you receive my switches and money order yet?

PM sent......

[rude]

Dave

Do you still have a Parking Light Upgrade kit available? If so how much and where do I send the money order to?

Thanks for all the work and great write-ups for the Honda wiper motor upgrade. I've struck out finding a 91 Civic motor but I have a 94 Accord in hand. I'll have another look this weekend before I start grinding on the shaft of the one I have.

Thanks, Rudi

[Zs-ondabrain]

I do, but I'm on my last few connectors, yours will be one of the last "Plug and Play" Parking light upgrade harness's that I'll be able to make, unless I find another supplier. All other PLH's will be hard-wire only until I find some more connectors.

just write me at wolfin32z@yahoo.com

I think someone else had mentioned another year of civic that has the smaller slotted shaft, 90' or something like that.

Dave.

[JonnyRock]

Hey Dave,

I never mentioned this, but thought you'd like to know. Apparently the under-dash wire jiggling you did to get my gauge lights working had the benefit of powering my clock as well.

Now it runs like new! Who'd have guessed, a working Datsun clock!

[Zs-ondabrain]

*UPDATE*

Unless someone sells me some female connectors, I will no longer be making the "Plug and Play" Parking light upgrade harness's for the pre 3/73' 240Z's

Please read this forum link for more info.
http://www.classiczcars.com/forums/showthread.php?threadid=30137

Thanks,
Dave.

[mlc240z]

hey Dave,
i don't think it's morally right for you to demand that someone sell you some females before you will make the harne.............................

never mind, i read that wrong:D!!

just makes me glad that i bought mine early. now if i can just get off my lazy butt and install it.....
keep up the great work.

[Zs-ondabrain]

!!!UPDATE!!!

ALL OF THE PARKING LIGHT UPGRADES ARE NOW PLUG & PLAY.

Not only did I find a new supplies for the large 6-pin combo switch connectors, But I also found the correct small 9-pin connectors (pictured below). So the mid to late 240Z's, ALL 260Z's and the 280Z's with the same square 9-pin connector can now be plug and play like the 240Z's.....

Thanks to all for your input on where to find the connectors but also your patience in the last few months. The PLH's are still $45 and now available for ALL 240Z's and 260Z's, and early 280Z's.

Thanks again to all, If you have any questions, feel free to PM me anytime.

Dave.

[Zs-ondabrain]

I guess I should update this thread every so often to keep everybody up to date on parts, prices and availability. So here ya go...........

All of my upgrades are still available and better than before.
All four electrical upgrades are now "Plug-N-Play"

The HLH or Head Light Upgrade harness is still $125 and only for the 240Z with white square connectors in front of the radiator.

The PLH or Parking Light Upgrade Harness is now $50 and is "Plug-N-Play" for ALL 240Z's (with the 6-pin combo switch connector)
ALL 260Z's and the early 280Z's with the square 9-pin connector on the combo switch.

The ZXP is still $15 and for the 240Z ONLY. The ZXP allows you to Upgrade your 40 amp alternator to an internally regulated 60 amp 280ZX alternator.

The SCP's are still $25 and for the 240Z's ONLY. The SCP turns your front sidemarkers into blinkers when the turn signals are used. The 240Z front turn signals are too low to be usefull but the SCP allows others, on the side of you to see your turn signals blink. A great safety feature. you get 2, one for each side (L+R)

The CTS Service is now $60. The CTS is a Combo and turn signal switch service where I completely rebuild your switches as a pair. I do my best to bring them back to OEM specs, regrease everything, repaint when needed and replace worn parts to make your switches look their best and Operate like they are supposed to.

I still offer the .....
LED side markers lights for $80
LED Front marker light conversion for $125
LED Taillight conversion for $250 for 240Z's and $300 for 260/280Z's

All the prices above include return shipping so the price you see is the price you pay. I also offer multiple item discounts, just ask me.

Dave
wolfin32z@yahoo.com for shipping and payment info.