Wheels, Tires and Brakes
65 topics in this forum
-
- 11 replies
- 4.8k views
Fellow Skyline owners, (I'm still getting used to how that sounds... ...) How many of you have the optional MK63 4piston calipers on the front of your Skyline? While you may be running 15" or larger diameter wheels, have you tried fitting 14" steelies over these calipers? Did your car come with a 14" steel spare in the trunk? Let me know please, Thanks. -e
Last reply by EricB, -
-
- 2 replies
- 3.3k views
Hi Anyone know if the lowering springs from a sedan will fit a a coupe http://www.ebay.com.au/itm/NISSAN-DATSUN-240K-1972-77-SEDAN-FRONT-REAR-LOW-30mm-LOWERED-COIL-KINGSPRINGS-/150722130731?pt=AU_Car_Parts_Accessories&hash=item2317bd332b Thanks Brad
Last reply by Noddle, -
- 4 replies
- 5.5k views
Looking for old out of speck aluminum brake drums, so that we can reline them and get them back into useage Paying good money for your old drums. J&G Drum Relining McHenry, IL. USA 815-276-2578
Last reply by sblake01, -
- 12 replies
- 5.7k views
before i rip apart my rebuilt 240k struts to try and fit r33 4 pot calipers, i was wondering if anyone has done this before?? rang Datsport and was told "its too hard, get R31 struts"..... can i use the r33 5 stud hubs?? i know the toyota/hilux calipers are the go for an easy conv, but i dont have a set of them, but i do have 1 set of alloy nissan 4 spots & 1 set of cast iron nissan 4 spot callipers (what are these off) and a set of VL turbo calipers. might have to ebay them the get the Hilux ones if there is no hope of fitting these??
Last reply by N1GTR, -
is there anyway i can convert my drum on the rear to disc brakes. any special adaptors or donor parts i can get from other cars to make it work possible 280z cars? thanks mikey
Last reply by N1GTR, -
- 10 replies
- 5.9k views
I was just wondering what the similarities were with the 240Z/260Z/280Z and the 510 suspension. Will the 280Z lower control arms, tension rods etc. fit the 240k? Would the rear brake conversion for a Datsun 510 work for a 240K? What suspension parts off of these cars would fit? does anyone know?
Last reply by ovenfood, -
- 1 reply
- 3.5k views
I Just found this original pad, in a near buy shop has the # 46531-S0100 whst is on your car ? btw it has 11 setp up 3 steps horisontal and 11 step down is it the replacement for 46531-73001
Last reply by uras1, -
- 21 replies
- 9k views
Hi Guys, i am just about to put in an order for a set of 16x8 (0 offset) front and 16x8.5 (-6 offset) rear watanabe R's in magnesium centre and polished lips. The reason i am going so large is to fit a set of R34 Skyline GTT disc and calipers on the front (large 4 spot aluminimum calipers, 300mm discs). I chose the particular offset and size as this was one of the 2 recommendations from the watanabe website (the other being in 15") for the KPGC110 GTR, and the GTT came out with 17" wheels standard. To be honest, i have no idea if the 16" will fit, i have the flares to go on the car, but someone also said the GT-R track is wider than the KHGC110. anybody here good with wo…
Last reply by uras1, -
- 19 replies
- 6.5k views
Hi All, My forst post here!!!! Got myself a 240K coupe today, a little on the rough side, but I can fix that! Just wondering weather later Skyline wheels will fit? To re phrase, is there a list somewhere of STD fitment Datsun/Nissan factory wheels that I can fit to dress her up a bit?? Thanks, Adam.
Last reply by ovenfood, -
S13 coil overs 1 2 3
by ovenfood- 27 replies
- 10.6k views
hey ive been doing work on some S130's (yes i know that its not a C110 but the fronts are the same between the two) and i just thought anyone who wants coil overs in the front may want to have a look at this thread i am doing in the S130 section, http://www.classiczcars.com/forums/showthread.php?p=343274#post343274 the hybridz S130 guys seem to be more active in asking questions so there is a little more info on the hybridz thread, http://forums.hybridz.org/index.php/topic/95443-j-rex-from-team-shogun-s130-with-s13-coil-overs/ i am still learning so if there is anyone who would like to have some input its most welcome :>
Last reply by ovenfood, -
- 10 replies
- 3.9k views
I recently fitted S14 lower control arms to the vert to get more front end track and when I lowered the car down the passenger side sat lower than the drivers side. The same struts and springs were used and it sat fine before I changed the lca's. Any ideas what may be the cause of it sitting unlevel? the lca's were undamaged factory items. I pushed the ball joints in my self so I know they were in right Could camber change the height level this much?. See how it sits lower in the pic, just under 1 inch lower than the other side. Some more photos you can see in this pic that the lower side has a lot of camber, I haven't bought adjustable strut tops yet to fix i…
Last reply by harvo, -
- 13 replies
- 6.8k views
here's some photos of my k, which is coming along slowly, still got to do a full respray (thinking r32 gtr white) but not sure what wheels to use... I got these aluminium wheels for when I added the flares, they have quite a large negative offset, but I am thinking that some watanabes would be a little sweeter. also needs a tidy up in the engine bay, and most of the gtr bits - mirrors, grille, badges etc. It's not a cheap excercise gathering the bits, is it? On yahoo at the moment, someone is selling a grille for over 1700 dollars. I find it amazing that these parts are starting to be worth this much!
Last reply by khughes,
-
Recently Browsing 0 members
- No registered users viewing this page.